Westinghouse PEK1370W, PEK1350W, GEK1385W, GEK1235W Using the Timer and Clock, Will be displayed

USING THE TIMER AND CLOCK OPERATING THE PROGRAMMABLE CLOCK

Using the 60 minute ringer timer

To set the timer:

1.Turn the knob clockwise to the required number of minutes. When the time has elapsed the timer will give a short ring.

NOTE: For times below 20 minutes, turn the knob past

20 minutes and then back to the required number of minutes.

Using the 2 hour cut-off timer

Manual operation

The timer needs to be set at the “O” marker so that the oven can be used manually.

Automatic operation

The 2 hour timer features an automatic oven “cut off”. This means that a cooking period of up to 120 minutes can be set.

1.Set the Oven Temperature Control Knob to the required temperature.

2.Turn the cut-off timer clockwise to the required number of minutes. For timer settings of less than 20 minutes, turn the knob past 20 minutes and then back to the required number of minutes. (Purpose – to set audible ringer.)

3.When the timer returns to “Auto Off”, the timer gives a short ring and the oven will be switched off.

4.The oven will not operate again until you turn the timer back to the “O” marker.

NOTE: It is not recommended to use this timer for short duration, e.g. boiling eggs.

TIMER

OVEN TIMER

USAGE18

WARNING

•The Clock MUST be set to operate oven.

General features

Your 3 button programmable timer has the following features:

•Timer – your 3 button programmable timer allows you to set a countdown time that will beep when the set time has elapsed.

•Cooking duration – You can set a cooking duration.

A timer will count down the preset cooking time, beep when the time has elapsed and turn the oven off.

•End cooking time – you can set a cooking finish time.

A timer will count down the preset cooking time, beep when the finish time has been reached and turn the oven off.

•Delayed start cooking time – You can combine the cooking duration and cooking end time to switch the oven on and off at a specific time during the day.

NOTE: Your 3 button programmable timer only operates with your oven.

Change the time of day (Daylight saving)

1.Press the “mode” button until the “clock” indicator begins flashing.

2.Press the – or + buttons to change the time. 5 seconds after the last change, the “clock” indicator will disappear, confirming the time has been set.

Setting the timer

1.Press the “mode“ button until the “timer” indicator begins flashing.

2.Set the countdown time you want by using the – and + buttons. 5 seconds after the last change the “timer” indicator will stop flashing, confirming the timer has been set.

3.To stop the beeper, press any button.

Setting the cooking duration

1.Check the clock displays the correct time of day.

2.Set the oven to the desired temperature. The oven indicator light will glow and the oven will come on.

3.Press the “mode“ button until the “cook time” indicator begins flashing.

4.Set the cooking duration you want by using the – or + buttons. 5 seconds after the last change, the “cook time” indicator will stop flashing, and the time of day

will be displayed.

NOTE: Do not forget to add preheating time if necessary.

WMAN_540 Upright_Jun11.indd 18 28/06/11 12:07 PM