westinghouse 11
SETTING AND STARTING A WASHING PROGRAM
STARTING THE WASHING PROGRAM WITHOUT DELAY START
1.Close the appliance door.
2.Switch on the appliance. Make sure that the appliance is in setting mode.
3.Set a washing program. Refer to 'Wash- ing programs'.
•The related program indicator comes on.
•All other program indicators go off.
•The time of the program flashes in the display.
•The START indicator flashes.
4.Press the START button. The washing program starts.
•The time of the program is no longer flashing in the display.
•The START indicator is no longer flashing.
STARTING THE WASHING PROGRAM WITH DELAY START
1.Close the appliance door.
2.Switch on the appliance. Make sure that the appliance is in setting mode.
3.Set a washing program.
4.Press the DELAY button repeatedly until the display shows the time you want to set for the delay start.
•The time of the delay start flashes in the display.
5.Press the START button. The count- down starts.
When the countdown is completed, the washing program starts automatically.
The opening of the appliance door in- terrupts the countdown. When you close the door, the countdown contin- ues from the point of interruption.
CANCELLING THE DELAY START
If you have not yet pressed the START button
1.Press the DELAY button repeatedly until the display shows the time of the wash- ing program.
2.Press the START button, the washing program starts.
If the START button has been pressed and the countdown operates
•Press the DELAY button repeatedly until the display shows the time of the wash- ing program. After a few seconds the washing program starts automatically.
Warning! Only interrupt or cancel a washing program if necessary. Attention! Open the door carefully. Hot steam and water can escape.
INTERRUPTING A WASHING
PROGRAM
•Open the appliance door. The washing program stops.
•Close the appliance door. The washing program continues from the point of in- terruption.
CANCELLING THE WASHING
PROGRAM
If you have not yet pressed the START but- ton, you can change the setting.
To change the setting while the washing program operates, it is necessary to cancel the program.
•Press and hold the PROGRAM button and the DELAY button at the same time until all the program indicators come on.
Make sure that there is detergent in the detergent dispenser before you start a new washing program.
END OF THE WASHING PROGRAM
When the washing program is completed, the display shows 0.
1.Switch off the appliance.
2.Open the appliance door.
For better drying results, keep the ap- pliance door ajar for some minutes.
REMOVING THE LOAD
•Let the dishes cool down before you re- move them from the appliance. Hot dishes are easily damaged.
•First remove items from the lower basket, then from the upper basket.