Stow SFG10E manual Multi-Segmented, Dry Diamond Disc

Page 19

CAUTION

An insufficient seating torque value will allow the insert to become loose from the unit body, resulting in premature component wear and improper scraping action. An excessive torque value will strip the threads of the capscrew or unit body.

ASSEMBLY INSTRUCTIONS/OPERATIONS

Multi-Segmented, Dry Diamond Disc

Many times increased concrete removal rates can be achieved with the use of multi-segmented, dry diamond discs. FIGURE 21. These discs are designed to operate dry or can also be utilized with water. If the wet option is chosen, an external source for providing water must be devised. No provision for water use is provided with the SURFACE GRINDER. Typical discs are approximately 10 inch diameter and feature up to 20 diamond segments that are welded or brazed to each assembly.

4)Determine that the unit body is free to rotate about the 5/16 inch diameter capscrew that retains the body to the unit. A body that does not freely rotate indicates that a material build-up exists between the rubber mount and retaining capscrew exits. This build-up must be removed by disassembling the body from the unit and cleaning all contact areas with the safety solvent. FIGURE 20.

The SCRAPE-R-TACH system is designed to be installed with the edge of the tungsten carbide inserts facing the direction of rotation. Markings are provided to indicate proper direction of rotation.

To install the multi-segmented, dry diamond disc, the standard, aluminum, multi-accessory disc is first removed from the SURFACE GRINDER. The diamond disc fastens directly to the gimbal head with 3/8 inch diameter x 1 inch long Allen head capscrews. FIGURE 22. The rear wheel assembly is then placed in the lowest position to compensate for the thickness variance of the diamond discs. FIGURE 23.

FIGURE 20

CAUTION

Installing the SCRAPE-R-TACH system with the tungsten carbide inserts facing opposite the rotation direction will not deliver satisfactory material removal rates and result in premature component wear requiring early replacement.

FIGURE 21

FIGURE 22

SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model SFG10E SILICOSIS/RESPIRATORYWARNINGS Table of Contents Stow Construction Equipment Parts Ordering Procedures’ASSISTANCE Appropriee Avant D’UTILISER LE Produit Page Operator Instructional Data Sheet Safety Precautions Safety Precautions Operation MAINTENANCE, Repair and Storage Removing the Surface Grinder from the Pallet AssemblyTheory of Operation MULTI-ACCESSORY Attachments and ApplicationsGrinding Stones Scarifier Blocks Tungsten Carbide Grinding BlockStar Flail Pentagonal Flail Beam FlailScarifier Block Bushing SpacerWasherFloor Brushes Wire brushesSCRAPE-R-TACH Industrial Floor Coatings Removal System Follow all safety precautions for the safety solvent Multi-Segmented, Dry Diamond Disc Diamond Segment Block Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Starting the SFG10E Surface Grinder on the Jobsite Adjustingthe Operator Handle HeightAssembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Page Early Age Grinding Stoppingthe SFG10E Surface GrinderDefinitions of floor flatness and levelness Defined Versus RandomTraffic Patterns How to Define Surface RegularityTR 34 tolerances for defined traffic floors Observe all applicable safety precautions for the solvent Preventative Maintenance Check ListInstalling a Replacement V-BELT or Pulley MAINTENANCE/SERVICEMAINTENANCE/SERVICE Lubrication Requirements Lubrication PointsElectric Motor Service Uneven Grinding Action Operational ProblemsElectric Motor ACCELERATEDV-BELTWEARStorage Specifications Page Remarks Part NameQty Description Suggested Spare PartsOperator Handle Assy Operator Handle AssyCAM, Switch COVER, SwitchMOUNT, Rubber SFWS277 ASSEMBLY, Swivel SwitchElectric Motor Assy Electric Motor AssyIncluded with Item MOTOR, ELECTRIC, 1-1/2 HP, 115 VACMOUNT, Electric Motor PulleyWheel Dolly Assy Wheel Dolly AssyWASHER, FLAT, 3/4, Plated ARM, SwingWheel SCRAPER, WheelFrame Assy Frame AssyCONNECTOR, GREASE, 1/8 Pipe WeightDISC, MULTI-ACCESSORY, LH CONNECTOR, GREASE, 1/4-28 UNFSafety and Dust Shield Assy Safety and Dust Shield AssySTRAP, Skirt Skirt AssyBUMPER, Rubber HOSE, VacuumScarifier Assy Scarifier AssyNUT, HEX 3/8 UNC, Nylock Plated HousingBushing See NoteSCRAPE-R-TACH Assy SCRAPE-R-TACH AssyNUT, Nylock 5/16-1/8 UNC, Plated HOLDER, InsertSpacer INSERT, Tungsten CarbideGrinding Block Assy Grinding Block AssyAggress Grinding BlockRing Wedge PlasticDecals DecalsDECAL, Warning SFSP8E5HP5020 DECAL, WarningDECAL, Grease Bearings DECAL, Motor START/STOP Sfdclsdp DECAL, Stow LargeFreight Policy Special Expediting ServicePRICING, Rebates Specifications Payment TermsPage Parts Department Heres HOW to GET Help

SFG10E specifications

The Stow SFG10E is a versatile and robust generator designed for various applications, making it an ideal solution for both commercial and residential use. Its compact size and durable construction cater to the need for reliable power in both urban and rural settings.

One of the main features of the SFG10E is its impressive power output. With a maximum output of 10 kVA, it is capable of handling several appliances and tools simultaneously, making it perfect for construction sites, outdoor events, and backup power for homes during outages. The generator is powered by a highly efficient diesel engine, providing enhanced fuel economy and extended run times, which is vital for users who require consistent power for extended periods.

The SFG10E is equipped with advanced technologies that enhance its performance and usability. Its automatic voltage regulation (AVR) ensures that the output voltage remains stable, protecting connected devices from voltage spikes and fluctuations that could cause damage. Additionally, the generator features an easy-to-read digital control panel, allowing users to monitor performance metrics such as voltage, frequency, and runtime at a glance.

Another characteristic that sets the SFG10E apart is its user-friendly design. It features a built-in fuel gauge, making it easy for users to monitor fuel levels and plan for refueling as needed. The compact and lightweight design ensures portability, making it easy to transport to different locations when required. Furthermore, the generator is designed with noise reduction in mind. Its sound-dampening technology minimizes operational noise, making it suitable for use in noise-sensitive environments.

Safety is also a priority in the design of the SFG10E. It includes several safety features such as low oil shutdown, overload protection, and an emergency stop function, providing peace of mind to users who depend on it for their power needs. Its rugged construction is further enhanced by weather-resistant materials, allowing it to withstand the elements, whether in sunny, rainy, or windy conditions.

In conclusion, the Stow SFG10E generator combines power, efficiency, and safety in a compact and portable design. With its advanced features and technologies, it stands out as a dependable choice for those needing reliable electricity in various environments, whether at home, on a job site, or while enjoying outdoor activities. Its emphasis on user-friendliness and safety makes it not just efficient but also easy to operate for users of all experience levels.
Top Page Image Contents