Stow SFG10E manual Assembly INSTRUCTIONS/OPERATIONS

Page 22

ASSEMBLY INSTRUCTIONS/OPERATIONS

REMOVING A MULTI-ACCESSORY ATTACHMENT (not including multi-segmented,dry diamond discs) FROMTHE ROTATING DISC

Tools Required:

1 Small Hammer

1 Drift Punch or Small Pry Bar

4)Return the SURFACE GRINDER to its normal operating position.

5)If the machine is to be used immediately, reconnect the extension cord or SURFACE GRINDER from the power source. Determine that the ON/OFF switch located on the operator handle is in the OFF position.

DANGER

WHEN REMOVING A MULTI-ACCESSORY ATTACH- MENT FROM THE SURFACE GRINDER, ALWAYS WEAR APPROPRIATE SAFETY EYEWEAR AND AP- PARELTO MINIMIZETHE POTENTIAL FROM FLYING DEBRIS. FLYING DEBRIS CAN RESULT IN PROP- ERTY DAMAGE AND/OR PERSONAL INJURY.

1)Disconnect the extension cord or SURFACE GRINDER from the power source.

2)Tilt the SURFACE GRINDER back until the operator handle comes in contact with the surface. Appropriate wheel chocks are recommended.

3)The multi-accessory attachment can be removed by both the use of a drift punch or small, pry bar. If utilizing the drift punch, strike the narrow end of the mounting wedge with controlled, direct blows until the attachment is released from the aluminum disc. If utilizing the pry bar, position the bar between the aluminum disc and the attachment. Use controlled, direct blows to the bar in order to force the attachment loose from the aluminum disc. FIGURE 28.

FIGURE 28

CAUTION

Do not utilize excessive force when removing a multi- accessory attachment with the pry bar. Excessive force can result in damage to the aluminum disc. Proper removal techniques by both methods will result in minimal damage to the aluminum disc.

DANGER

UNEXPECTED MACHINE START UP CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.

TRANSPORTINGTHE SURFACE GRINDER

The SURFACE GRINDER has an operational weight that prohibits one person from loading and/or unloading it alone by conventional, physical efforts.

DANGER

DO NOT ATTEMPTTO LIFTTHE SURFACE GRINDER UP INTO A TRANSPORTATION VEHICLE WITH THE USE OF ONE PERSON ALONE. DO NOT ATTEMPT TO LOWERTHE SURFACE GRINDER FROM ATRANS- PORTATION VEHICLE WITH THE USE OF ONE PERSON ALONE. LIFT AND/OR LOWER THE SUR- FACE GRINDER ONLY BY THE USE OF A POWER TAILGATE UNIT, A SUITABLE HOIST UNIT OF PROPER CAPACITY AND/OR CONFIGURATION OR BYTHE USE OF A PROPER QUANTITY OF PERSON- NEL IN PROPER PHYSICAL CONDITION.

1)A lifting bail device can be used to facilitate lifting by a mechanical device incorporating a chain and suitable attachment device. The location of the lifting bail may not always locate the exact position of the center of gravity for the SURFACE GRINDER. Lifting handles are also provided on both sides of the transmission case. These handles can be utilized by personnel whenever lifting/lowering the SURFACE GRINDER or as attachment points for a chain sling whenever a suitable hoisting device is utilized. FIGURE 29.

SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model SFG10E SILICOSIS/RESPIRATORYWARNINGS Table of Contents Parts Ordering Procedures Stow Construction Equipment’ASSISTANCE Appropriee Avant D’UTILISER LE Produit Page Operator Instructional Data Sheet Safety Precautions Safety Precautions Operation MAINTENANCE, Repair and Storage Assembly Removing the Surface Grinder from the PalletTheory of Operation MULTI-ACCESSORY Attachments and ApplicationsGrinding Stones Scarifier Blocks Tungsten Carbide Grinding BlockStar Flail Beam Flail Pentagonal FlailSpacerWasher Scarifier Block BushingFloor Brushes Wire brushesSCRAPE-R-TACH Industrial Floor Coatings Removal System Follow all safety precautions for the safety solvent Multi-Segmented, Dry Diamond Disc Diamond Segment Block Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Adjustingthe Operator Handle Height Starting the SFG10E Surface Grinder on the JobsiteAssembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Page Early Age Grinding Stoppingthe SFG10E Surface GrinderDefinitions of floor flatness and levelness How to Define Surface Regularity Defined Versus RandomTraffic PatternsTR 34 tolerances for defined traffic floors Preventative Maintenance Check List Observe all applicable safety precautions for the solventMAINTENANCE/SERVICE Installing a Replacement V-BELT or PulleyMAINTENANCE/SERVICE Lubrication Points Lubrication RequirementsElectric Motor Service ACCELERATEDV-BELTWEAR Operational ProblemsElectric Motor Uneven Grinding ActionStorage Specifications Page Part Name RemarksSuggested Spare Parts Qty DescriptionOperator Handle Assy Operator Handle AssySwitch COVER, SwitchMOUNT, Rubber SFWS277 ASSEMBLY, Swivel CAM, SwitchElectric Motor Assy Electric Motor AssyPulley MOTOR, ELECTRIC, 1-1/2 HP, 115 VACMOUNT, Electric Motor Included with ItemWheel Dolly Assy Wheel Dolly AssySCRAPER, Wheel ARM, SwingWheel WASHER, FLAT, 3/4, PlatedFrame Assy Frame AssyCONNECTOR, GREASE, 1/4-28 UNF WeightDISC, MULTI-ACCESSORY, LH CONNECTOR, GREASE, 1/8 PipeSafety and Dust Shield Assy Safety and Dust Shield AssyHOSE, Vacuum Skirt AssyBUMPER, Rubber STRAP, SkirtScarifier Assy Scarifier AssySee Note HousingBushing NUT, HEX 3/8 UNC, Nylock PlatedSCRAPE-R-TACH Assy SCRAPE-R-TACH AssyINSERT, Tungsten Carbide HOLDER, InsertSpacer NUT, Nylock 5/16-1/8 UNC, PlatedGrinding Block Assy Grinding Block AssyWedge Plastic BlockRing Aggress GrindingDecals DecalsDECAL, Motor START/STOP Sfdclsdp DECAL, Stow Large DECAL, WarningDECAL, Grease Bearings DECAL, Warning SFSP8E5HP5020Payment Terms Special Expediting ServicePRICING, Rebates Specifications Freight PolicyPage Heres HOW to GET Help Parts Department

SFG10E specifications

The Stow SFG10E is a versatile and robust generator designed for various applications, making it an ideal solution for both commercial and residential use. Its compact size and durable construction cater to the need for reliable power in both urban and rural settings.

One of the main features of the SFG10E is its impressive power output. With a maximum output of 10 kVA, it is capable of handling several appliances and tools simultaneously, making it perfect for construction sites, outdoor events, and backup power for homes during outages. The generator is powered by a highly efficient diesel engine, providing enhanced fuel economy and extended run times, which is vital for users who require consistent power for extended periods.

The SFG10E is equipped with advanced technologies that enhance its performance and usability. Its automatic voltage regulation (AVR) ensures that the output voltage remains stable, protecting connected devices from voltage spikes and fluctuations that could cause damage. Additionally, the generator features an easy-to-read digital control panel, allowing users to monitor performance metrics such as voltage, frequency, and runtime at a glance.

Another characteristic that sets the SFG10E apart is its user-friendly design. It features a built-in fuel gauge, making it easy for users to monitor fuel levels and plan for refueling as needed. The compact and lightweight design ensures portability, making it easy to transport to different locations when required. Furthermore, the generator is designed with noise reduction in mind. Its sound-dampening technology minimizes operational noise, making it suitable for use in noise-sensitive environments.

Safety is also a priority in the design of the SFG10E. It includes several safety features such as low oil shutdown, overload protection, and an emergency stop function, providing peace of mind to users who depend on it for their power needs. Its rugged construction is further enhanced by weather-resistant materials, allowing it to withstand the elements, whether in sunny, rainy, or windy conditions.

In conclusion, the Stow SFG10E generator combines power, efficiency, and safety in a compact and portable design. With its advanced features and technologies, it stands out as a dependable choice for those needing reliable electricity in various environments, whether at home, on a job site, or while enjoying outdoor activities. Its emphasis on user-friendliness and safety makes it not just efficient but also easy to operate for users of all experience levels.
Top Page Image Contents