MAINTENANCE (MIXER)/STORAGE
9.NEVER! pour or spray water over the engine (Figure 37).
Figure 37. No Spraying of Water
10.When cleaning of the entire mixer is done, return mixing drum to an upright position.
WARNING — Keep Hands Clear of Drum
When rotating the mixing drum from the dump position to the upright position, keep hands clear of safety grate. The possibility exists of hands or fingers being crushed (Figure 42).
Figure 38. Safety Grate (Crush Hazard)
WARNING — Disengaged Drum Lock
DO NOT start engine or engage paddle arms when drum lock lever is not engaged.
MIXER STORAGE
For storage of the mixer for over 30 days, the following is recommended:
zDrain the fuel tank completely, or add
zRun the engine until the fuel is completely consumed.
zCompletely drain used oil from the engine crankcase and fill with fresh clean oil, then follow the procedures described in the engine manual for engine storage.
zClean the entire mixer and engine compartment.
zPlace the mixing drum in the down position (mouth facing downward).
zCover the mixer and place it a clean dry area, that is protected from harsh elements.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 31