Multiquip QP2TH manual General Information

Page 13

GENERAL INFORMATION

APPLICATION

The Multiquip QP2TH Trash Pump is designed to be used for dewatering applications. Both the suction and discharge ports on the QP2TH trash pump use a 2-inch diameter opening,which allows the pump to pump at a rate of approximately 211 gallons/minute (gpm) or 800 liters/ minute (lpm).

Trash pumps are designed to purge air from the suction line and create a partial vacuum in the pump body. The reduced atmospheric pressure inside the pump allows water to flow through the suction line and into the pump body. The centrifugal force created by the rotating impeller pressurizes the water and expels it from the pump.

TRASH PUMP

Trash pumps derive their name from their ability to handle a greater amount of debris and solids than standard centrifugal pumps. These pumps generally handle solids up to 1/2 the size of the discharge opening making them less likely to clog. Also trash pumps are capable of handling water with 25% solids by weight.

The advantage of using a trash pump is that it can be quickly and easily disassembled in the field "without tools" and easily cleaned when clogged.

POWER PLANT

This trash pump is powered by a 4.8 horsepower air cooled 4-stroke, single cylinder HONDA GX160 gasoline engine that incorporates a low “Oil Alert Feature.”

OIL ALERT FEATURE

In the event of low oil or no oil, the HONDA GX160 engine has a built-in oil alarm engine shut-down feature. In the event the oil level is low the engine will automatically shutdown.

SUCTION LIFT

This pump is intended to be used for dewatering applications and is capable of suction lifts up to 25 feet at sea level. For optimal suction lift performance keep the suction hose or line as short as possible. In general always place the pump as close to the water as possible.

PUMP SUPPORT

The pump should always be placed on solid stationary

ground in a level position.

NEVER place the pump on soft soil. The suction hose or pipe connection should always be checked for tightness and leaks. A small suction leak in the hose or fittings could prevent the pump from priming.

Elevation

Higher elevations will effect the performance of the pump. Due to less atmospheric pressure at higher altitudes, pumps DO NOT have the priming ability that they have at sea level. This is due to the “thinner air” or lack of oxygen at higher altitudes.

A general rule of thumb is that for every 1,000 feet of elevation above sea level a pump will lose one foot of priming ability.

For example, in Flagstaff, Arizona where the elevation is approximately 7,000 feet, the pump would have a suction lift of only 18 feet rather than the 25 feet at sea level. Table 3 shows suction lift at various elevations.

Table 3. Suction Lift at Various Elevations

Altitude

FeetSuction Lift in Feet (Meters) (Meters)

Sea Level

10.0 (3.048)

15.0 (4.572)

20.0 (6.096)

25.0 (7.620)

2,000

(610)

8.80 (2.680)

13.2 (4.023)

17.6 (5.364)

22.0 (6.705)

 

 

 

 

 

 

4,000

(1,219)

7.80 (2.377)

11.7 (3.566)

15.6 (4.754)

19.5 (5.943)

6,000

(1,829)

6.90 (2.103)

10.4 (3.169)

13.8 (4.206)

17.3 (5.273)

8,000

(2,438)

6.20 (1.889)

9.30 (2.834)

12.4 (3.779)

15.5 (4.724)

10,000 (3,048)

5.70 (1.737)

8.60 (2.621)

11.4 (3.474)

14.3 (4.358)

Table 4 shows percentage drops in performance as elevation increases.

Table 4. Performance Loss at Various Elevations

Altitude

Discharge Flow

Discharge Head

Feet (Meters)

 

 

Sea Level

100%

100%

2,000

(610)

97%

95%

4,000

(1,219)

95%

91%

6,000

(1,829)

93%

87%

8,000

(2,438)

91%

83%

10,000 (3,048)

88%

78%

QP2TH TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #5 (01/29/14) — PAGE 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents This Manual Must Accompany the Equipment AT ALL Times Model QP2THProposition 65 Warning QP2TH Trash Pump Operation and Parts Manual REV. #5 01/29/14 QP2TH Trash Pump Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationPump Safety General Safety„ Never open the priming plug when pump Serious damage to the equipment or engineFuel Safety Engine SafetyBefore servicing equipment Transporting Safety Battery Safety Electric Start only„ Use well-insulated gloves when picking up the battery Label must remain with the engine for its entire life Emissions InformationSpecifications Pump Specifications PumpDry Net Weight ModelSpecifications Engines Specifications EngineDimension EngineGeneral Information QP2TH Pump Application Pump ComponentsInitial Servicing Basic EngineMuffler Used to reduce noise and emissions Before Starting Inspection EngineOil Type SeasonSetup Operation Place the engine ON/OFF switch See in the on positionStarting the Engine Place the engine fuel valve lever See to the on positionAlways run engine at full speed while pumping Stopping the EnginePlace the fuel shut-off lever See in the OFF position Adjusting Impeller Clearance Maintenance PumpPump Cleaning Pump Vacuum TestPump Vacuum Tester Engine Maintenance Maintenance EngineEngine Maintenance Schedule First EveryDaily Engine AIR CleanerWeekly Engine OILSpark Arrester Removal Spark Arrester CleaningPump Storage StorageEngine Troubleshooting Troubleshooting EngineSymptom Possible Problem Solution Difficult to start Operation not satisfactoryPump Troubleshooting Troubleshooting ENGINE/PUMPSymptom Possible Problem Solution Explanation of Code in Remarks Column Sample Parts ListQty Description Suggested Spare PartsPump Assembly 1889100020 18891000111889100171 1889000132Pump Assembly M12 X 57 X15 X 39# 0520030310 01511912570204490060 0205490080Engine Service Parts 17620Z4M000 17620ZH702328462ZE2W11 28462ZH8003Freight Policy Terms and Conditions of Sale PartsQP2TH Trash Pump Operation and Parts Manual REV. #5 01/29/14 HERE’S HOW to GET Help

QP2TH specifications

The Multiquip QP2TH is a versatile and efficient piece of equipment tailored for various applications, including construction, landscaping, and roadwork. This powerful equipment is designed to provide robust performance, easy maneuverability, and a range of features that make it a valuable addition to any job site.

One of the standout features of the QP2TH is its robust construction, which includes a heavy-duty frame designed to withstand the rigors of demanding work environments. The equipment is built with high-quality materials, ensuring longevity and reliability. The QP2TH is equipped with a reliable engine, offering sufficient power to tackle tough tasks while maintaining efficiency. This engine not only provides excellent performance but also ensures lower fuel consumption, making it an economic choice for operators.

The QP2TH boasts advanced technology that enhances its usability, including automated features that simplify operation. Its intuitive control panel allows operators to easily select settings, monitor performance, and troubleshoot issues with minimal downtime. Additionally, the machine features ergonomic controls designed to reduce operator fatigue, enabling longer working hours without compromising comfort.

Maneuverability is another defining characteristic of the Multiquip QP2TH. The compact design coupled with robust wheels allows for easy navigation across various terrains, including rugged landscapes and tight urban spaces. This versatility ensures that the QP2TH can perform effectively in a range of job applications, from grading and trenching to compacting and leveling.

Another noteworthy feature is the machine's ability to accommodate a variety of attachments and accessories. This adaptability makes the QP2TH suitable for multiple tasks, enhancing its effectiveness as a multifunctional tool on the job site. Whether operators need to switch from a compactor to a grader, the QP2TH can meet those needs swiftly and efficiently.

In conclusion, the Multiquip QP2TH is a powerful and adaptable machine equipped with significant features and technologies that enhance its performance and usability. With its durable construction, efficient engine, ergonomic controls, and versatility in attachments, the QP2TH stands out as an essential asset for professionals in the construction and landscaping industries.
Top Page Image Contents