Multiquip QP2TH manual Battery Safety Electric Start only, Transporting Safety

Page 9

SAFETY INFORMATION

„Store fuel in appropriate containers, in well-ventilated areas and away from sparks and fl ames.

„NEVER use fuel as a cleaning agent.

„DO NOT smoke around or near the equipment. Fire or explosion could result from fuel vapors or if fuel is spilled on a hot engine.

BATTERY SAFETY (ELECTRIC START ONLY)

DANGER

„DO NOT drop the battery. There is a possibility that the battery will explode.

„DO NOT expose the battery to open fl ames, sparks, cigarettes, etc.The battery contains combustible gases and liquids. If these

gases and liquids come into contact with a fl ame or spark, an explosion could occur.

WARNING

„ALWAYS wear safety glasses when handling the battery to avoid eye irritation. The battery contains acids that can cause injury to the eyes and skin.

„Use well-insulated gloves when picking up the battery.

„ALWAYS keep the battery charged. If the battery is not charged, combustible gas will build up.

„DO NOT charge battery if frozen. Battery can explode. When frozen, warm the battery to at least 61°F (16°C).

„ALWAYS recharge the battery in a well-ventilated environment to avoid the risk of a dangerous concentration of combustible gases.

„ If the battery liquid (dilute sulfuric acid) comes into contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

„If the battery liquid (dilute sulfuric acid) comes into contact with eyes, rinse eyes immediately with plenty of water and contact the nearest doctor or hospital to seek medical attention.

CAUTION

„ALWAYS disconnect the NEGATIVE battery terminal before performing service on the equipment.

„ALWAYS keep battery cables in good working condition. Repair or replace all worn cables.

TRANSPORTING SAFETY

CAUTION

„NEVER allow any person or animal to stand underneath the equipment while lifting.

NOTICE

„Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing.

„Always make sure crane or lifting device has been properly secured to the lifting bail (hook) of the equipment.

„ALWAYS shutdown engine before transporting.

„NEVER lift the equipment while the engine is running.

„Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

„Use adequate lifting cable (wire or rope) of suffi cient strength.

„Use one point suspension hook and lift straight upwards.

„DO NOT lift machine to unnecessary heights.

„ALWAYS tie down equipment during transport by securing the equipment with rope.

QP2TH TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #5 (01/29/14) — PAGE 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents This Manual Must Accompany the Equipment AT ALL Times Model QP2THProposition 65 Warning QP2TH Trash Pump Operation and Parts Manual REV. #5 01/29/14 QP2TH Trash Pump Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationPump Safety General Safety„ Never open the priming plug when pump Serious damage to the equipment or engineEngine Safety Fuel SafetyBefore servicing equipment Battery Safety Electric Start only Transporting Safety„ Use well-insulated gloves when picking up the battery Label must remain with the engine for its entire life Emissions InformationSpecifications Pump Specifications PumpDry Net Weight ModelSpecifications Engines Specifications EngineDimension EngineGeneral Information QP2TH Pump Application Pump ComponentsBasic Engine Initial ServicingMuffler Used to reduce noise and emissions Before Starting Inspection EngineOil Type SeasonSetup Operation Place the engine ON/OFF switch See in the on positionStarting the Engine Place the engine fuel valve lever See to the on positionStopping the Engine Always run engine at full speed while pumpingPlace the fuel shut-off lever See in the OFF position Adjusting Impeller Clearance Maintenance PumpPump Cleaning Pump Vacuum TestPump Vacuum Tester Engine Maintenance Maintenance EngineEngine Maintenance Schedule First EveryDaily Engine AIR CleanerWeekly Engine OILSpark Arrester Removal Spark Arrester CleaningPump Storage StorageEngine Troubleshooting Troubleshooting EngineSymptom Possible Problem Solution Difficult to start Operation not satisfactoryTroubleshooting ENGINE/PUMP Pump TroubleshootingSymptom Possible Problem Solution Explanation of Code in Remarks Column Sample Parts ListQty Description Suggested Spare PartsPump Assembly 1889100020 18891000111889100171 1889000132Pump Assembly M12 X 57 X15 X 39# 0520030310 01511912570204490060 0205490080Engine Service Parts 17620Z4M000 17620ZH702328462ZE2W11 28462ZH8003Freight Policy Terms and Conditions of Sale PartsQP2TH Trash Pump Operation and Parts Manual REV. #5 01/29/14 HERE’S HOW to GET Help

QP2TH specifications

The Multiquip QP2TH is a versatile and efficient piece of equipment tailored for various applications, including construction, landscaping, and roadwork. This powerful equipment is designed to provide robust performance, easy maneuverability, and a range of features that make it a valuable addition to any job site.

One of the standout features of the QP2TH is its robust construction, which includes a heavy-duty frame designed to withstand the rigors of demanding work environments. The equipment is built with high-quality materials, ensuring longevity and reliability. The QP2TH is equipped with a reliable engine, offering sufficient power to tackle tough tasks while maintaining efficiency. This engine not only provides excellent performance but also ensures lower fuel consumption, making it an economic choice for operators.

The QP2TH boasts advanced technology that enhances its usability, including automated features that simplify operation. Its intuitive control panel allows operators to easily select settings, monitor performance, and troubleshoot issues with minimal downtime. Additionally, the machine features ergonomic controls designed to reduce operator fatigue, enabling longer working hours without compromising comfort.

Maneuverability is another defining characteristic of the Multiquip QP2TH. The compact design coupled with robust wheels allows for easy navigation across various terrains, including rugged landscapes and tight urban spaces. This versatility ensures that the QP2TH can perform effectively in a range of job applications, from grading and trenching to compacting and leveling.

Another noteworthy feature is the machine's ability to accommodate a variety of attachments and accessories. This adaptability makes the QP2TH suitable for multiple tasks, enhancing its effectiveness as a multifunctional tool on the job site. Whether operators need to switch from a compactor to a grader, the QP2TH can meet those needs swiftly and efficiently.

In conclusion, the Multiquip QP2TH is a powerful and adaptable machine equipped with significant features and technologies that enhance its performance and usability. With its durable construction, efficient engine, ergonomic controls, and versatility in attachments, the QP2TH stands out as an essential asset for professionals in the construction and landscaping industries.
Top Page Image Contents