Multiquip MVH408GH manual Explanation of Code in Remarks Column, Sample Parts List

Page 34

EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions.

NOTICE

The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed.

SAMPLE PARTS LIST

NO.

PART NO.

PART NAME

QTY.

REMARKS

1

12345

BOLT

1

INCLUDES ITEMS W/%

2%

 

WASHER, 1/4 IN

NOT SOLD SEPARATELY

2%

12347

WASHER, 3/8 IN.

..1

MQ-45T ONLY

312348 HOSE ..................A/R ...MAKE LOCALLY

412349 BEARING ..............1 .....S/N 2345B AND ABOVE

NO. Column

Unique Symbols — All items with same unique symbol (@, #, +, %, or >) in the number column belong to the same assembly or kit, which is indicated by a note in the “Remarks” column.

Duplicate Item Numbers — Duplicate numbers indicate multiple part numbers, which are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine.

NOTICE

When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order.

PART NO. Column

Numbers Used — Part numbers can be indicated by a number, a blank entry, or TBD.

TBD (To Be Determined) is generally used to show a part that has not been assigned a formal part number at the time of publication.

A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarifi ed in the “Remarks” Column.

QTY. Column

Numbers Used — Item quantity can be indicated by a number, a blank entry, or A/R.

A/R (As Required) is generally used for hoses or other parts that are sold in bulk and cut to length.

A blank entry generally indicates that the item is not sold separately. Other entries will be clarifi ed in the “Remarks” Column.

REMARKS Column

Some of the most common notes found in the “Remarks” Column are listed below. Other additional notes needed to describe the item can also be shown.

Assembly/Kit — All items on the parts list with the same unique symbol will be included when this item is purchased.

Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break — Used to list an effective serial number range where a particular part is used.

Indicated by:

“S/N XXXXX AND BELOW” “S/N XXXX AND ABOVE” “S/N XXXX TO S/N XXX”

Specific Model Number Use — Indicates that the part is used only with the specifi c model number or model number variant listed. It can also be used to show a part is NOT used on a specifi c model or model number variant.

Indicated by:

“XXXXX ONLY”

“NOT USED ON XXXX”

“Make/Obtain Locally” — Indicates that the part can be purchased at any hardware shop or made out of available items. Examples include battery cables, shims, and certain washers and nuts.

“Not Sold Separately” — Indicates that an item cannot be purchased as a separate item and is either part of an assembly/kit that can be purchased, or is not available for sale through Multiquip.

PAGE 34 — MVH408GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (03/25/14)

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Model MVH408GH This Manual Must Accompany the Equipment AT ALL TimesProposition 65 Warning Page Table of Contents MVH408GH Reversible Plate CompactorParts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Engine Safety Compactor SafetyBefore servicing equipment Battery Safety Electric Start only Fuel Safety Use well-insulated gloves when picking up the battery Transporting Safety Emissions InformationEngine Make SpecificationsCentrifugal Force 12,365 lbf 55 kN HondaDimensions 19.68 25.60 36.61 47.64 53.54 35.3 62.01General Information Components Plate Compactor ComponentsCast iron construction used in the compacting of soil Basic Engine Initial ServicingEngine OIL Check InspectionBefore Starting Fuel CheckVibrator OIL Check Belt InspectionBelt Tension Handle BARStartup Place the engine ON/OFF switch in the on positionStarting the Engine Do not pull the starter rope all the way to the end OpenStopping the Engine OperationOperation Never stop the engine suddenly while working at high speedsPlace the engine ON/OFF switch in the OFF position Place the fuel shut-off lever in the OFF positionMaintenance General MaintenanceEngine Maintenance Perform engine maintance as listed in TableTightening Torque Engine AIR CleanerMachine Inspection Perform machine inspection as listed in TableEngine OIL Cyclone CleanerUnlatch and remove dust pot Figure Hydraulic OIL Case the air bleeding is insufficient, repeat steps 9Spark Plug Spark Arrester CleaningBelt Storage Troubleshooting Compactor Troubleshooting Engine Troubleshooting EngineAir cleaner dirty? Clean or replace air cleaner Page Explanation of Code in Remarks Column Sample Parts ListXxxxx only Not Used on Suggested Spare Parts Vibrating Plate Assy Copper Packing Vibrating PlateOIL Gauge Packing 1/4 CUVibrator Assy Rotary SHAFT, Drive Connector PT, PF1/4Roller Bearing NJ310EMC4 GEAR, DriveBase and Engine Assy Belt COVER, Base L100Engine ASSY., GX390UT2SMXC Socket Head Bolt 10X25 TBase and Engine Assy NUT M14 WASHER, Flat M14Center Cover Rubber COVER, UpperElectric Device Assy Lead Wire SW-GROUND Wiring Fixed BaseStop SWITCH,ENGINE Wire HARNESS/MRH-600Control Assy WASHER, Flat M12 Handle Bracket RHandle Bracket L Rubber CouplingControl Assy Spiral Tube OIL HoseBreather CAP Travel LeverNameplate and Decals Assy Nameplate and Decals Assy Honda GX390UT2SMXC Cylinder Head Assy CLIP, Valve Guide GUIDE, IN. Valve OversizeGUIDE, EX. Valve Oversize GASKET, Cylinder HeadHonda GX390UT2SMXC Cylinder Barrel Assy BOLT, Drain Plug Switch ASSY., OIL LevelSHAFT, Governor ARM OIL SealHonda GX390UT2SMXC Crankcase Cover Assy PIN, Governor Weight WEIGHT, GovernorHOLDER, Governor Weight PACKING, OIL Filler CAPHonda GX390UT2SMXC Crankshaft Assy WASHER, Lock 8MM WEIGHT, BalancerBolt KEY 7X7X33 YellowHonda GX390UT2SMXC Piston Assy Ring SET, Piston BOLT, Connecting RODRing SET, Piston STD Piston STDHonda GX390UT2SMXC Camshaft Assy Camshaft Assy NUT, Pivot AdjustingSEAL, Valve Stem ROD, PushHonda GX390UT2SMXC Recoil Starter Assy RATCHET, Starter Case CP, Recoil Starter Includes Items W/ #PULLEY, Recoil Starter Spring FrictionHonda GX390UT2SMXC FAN Cover Assy Shroud CLIP, TubeCover CP, FAN/BLACK GROMMET, Drain HoleHonda GX390UT2SMXC Carburetor Assy Valve SET, Float PLATE, Lever SettingGasket SET Screw SET PilotHonda GX390UT2SMXC AIR Cleaner Assy COLLAR, AIR Cleaner Cover CP, AIR CleanerGROMMET, AIR Cleaner Collar B, AIR CleanerHonda GX390UT2SMXC Muffler Assy PIPE, Exhaust Muffler CompPROTECTOR, Exhaust Pipe CAP, MufflerHonda GX390UT2SMXC Fuel Tank Assy Tank CP, FUEL/BLACK RUBBER, Support 107MMJOINT, Fuel Tank CLAMP, Tube D8Honda GX390UT2SMXC Flywheel Assy Flywheel Comp FAN, CoolingPULLEY, Starter NUT, Special 16MMHonda GX390UT2SMXC Ignition Coil Assy CLIP, Harness Harness ASSY. Engine WireGROMMET, Cord Coil ASSY. IgnitionHonda GX390UT2SMXC Control Assy ARM, Governor Adjusting SpringHOLDER, Wire ROD, GovernorHonda GX390UT2SMXC Engine Decal Assy MARK, Throttle Indication MARK, AIR CleanerMARK, Choke Gray WRENCH, Spark PlugTerms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

MVH408GH specifications

The Multiquip MVH408GH is a powerful and versatile piece of equipment designed for professionals in the construction and landscaping industries. This robust vibratory plate compactor is engineered to deliver high performance while ensuring operator comfort and ease of use. With its advanced features and technology, the MVH408GH stands out as an essential tool for compacting soil, gravel, and asphalt.

One of the key features of the MVH408GH is its Honda GX160 engine. This reliable, air-cooled, 4-stroke engine offers excellent fuel efficiency and low emissions, making it an environmentally friendly option. The engine delivers a maximum power output, ensuring that the compactor can handle even the toughest jobs with ease. Thanks to its high-performance engine, the MVH408GH can achieve an impressively high compaction force, making it suitable for a wide range of applications.

The compactor is equipped with a heavy-duty, solid steel base plate, designed to withstand the rigors of frequent use. The base plate measures 22 inches wide, providing a large effective surface area that maximizes compaction efficiency. Additionally, the design of the plate helps to reduce vibration transmitted to the operator, enhancing comfort during prolonged operation.

Another significant feature of the MVH408GH is its easy maneuverability. The compactor features a lightweight design that allows operators to transport and position it effortlessly. It also comes with a foldable handle, which not only allows for compact storage but also provides convenient lifting and carrying options.

The technologically advanced vibration system in the MVH408GH helps to achieve superior compaction results. The system is precisely engineered to produce a high-frequency vibration, which aids in the densification of material during the compaction process. This results in optimal performance, enabling operators to complete their tasks more efficiently.

Safety is also a priority in the design of the MVH408GH. The compactor features a protective frame that shields the engine and other critical components from potential damage on the job site. Additionally, it is equipped with convenient controls that are easy to access, promoting safe and straightforward operation.

In summary, the Multiquip MVH408GH is a top-tier vibratory plate compactor characterized by its powerful Honda engine, robust construction, high compaction efficiency, and user-friendly design. The combination of these features makes it an ideal choice for construction professionals seeking reliability and performance in their compaction equipment.
Top Page Image Contents