2 | 7 | 8 | 3 |
9
1
16
11 6 5 4 12
10
13
14
15
OVEN AND ACCESSORIES
OVEN
1.Door
2.Door hinges
3.Oven lamp
4.Waveguide cover (DO NOT REMOVE)
5.Coupling
6.Oven cavity
7.Convection fan (covered)
8.Grill heating element (under the ceiling)
9.Control panel
10.Door latches
11.Door seals and sealing surfaces
12.Door safety latches
13.Ventilation openings
14.Outer cabinet
15.Power supply cord
16.Door handle
Hub (inside)
17. Turntable (glass)
19.Coupling 
18. Turntable support
20.Rack
ACCESSORIES:
Check to make sure the following accessories are provided:
(17) Turntable (18) Turntable support (19) Coupling (20) Rack
•Place the coupling into the turntable motor shaft and then place the turntable support in the centre of the oven floor so that it can freely rotate around the coupling. Place the turntable onto the turntable support so that it locates firmly into the coupling.
•To avoid turntable damage, ensure dishes and containers are lifted clear of the turntable rim when removing them from the oven.
•For use of the rack, refer to the grilling sections on page
Never touch the grill when it is hot.
NOTE: When you order accessories, please mention two items: part name and model name to your dealer or SHARP authorised service agent.
NOTES:
•The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not damaged.
•After cooking fatty foods without a cover, always clean the cavity and especially the grill heating element thoroughly, these must be dry and free from grease.
•Always operate the oven with the turntable and turntable support fitted correctly. This promotes thorough, even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage to the oven.
•All food and containers of food are always placed on the turntable for cooking.
•The turntable rotates clockwise or
WARNING:
The door, outer cabinet, oven cavity, accessories and dishes will become very hot during operation. To prevent burns, always use thick oven gloves.
ENGLISH