English | 53 |
Specifications
Audio
five
Continuous Amplifier Power (seven channels driven) 75 watts/ch
Continuous Amplifier Power (two channels driven) 100 watts (1kHz, <1.0% THD, 8 ohms, DIN)
Total Harmonic Distortion
<0.09% 0.05%
Intermodulation Distortion (60 Hz:7 kHz)
<0.05%
Frequency Response
10 Hz – 120 kHz, ±3dB (analog bypass)
10 Hz – 95 kHz, ±3dB (digital input)
Signal to Noise Ratio (IHF
92dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance
Line Level: 200 mV/100k ohms
Preamp Output Level/Output Impedance
1.0 V / 1k ohms
Contour (LF/HF)
±6dB at 50Hz/15kHz
Decodable Digital Input Signals
Dolby Digital, Dolby Digital EX, DTS,
Video
Input Resolutions
480i/576i, 480p/576p, 720p, 1080i
1080p (HDMI only)
Output Resolutions
480i/576i (Composite,
1080p (HDMI only)
Signal to Noise Ratio 45dB
Input Impedance
75 ohms
Output Impedance
75 ohms
Output Level
1.0 volt
HDMI Inputs/Output
Version 1.3, supporting Deep Color passthrough and Broad Color Space passthrough
FM Tuner
Usable Sensitivity
14.2dBf
Signal to Noise Ratio (at 65dBf) 70dB
Harmonic Distortion (at 65dBf) 0.03%
Stereo Separation (1 kHz)
45dB
Output level 1V
Antenna Input (unbalanced)
75 ohms
AM Tuner
Sensitivity
500µV/m
Signal to Noise Ratio 40dB
Output level 500 mV Antenna Input
Loop Antenna
General
Power Consumption
450 watts
100 watts (idle)
4.7 watts (standby)
Power Requirements (AC)
120 volts, 60Hz (USA version)
230 volts, 50Hz (CE version)
Weight
17kg
Dimensions (W x H x D) 431 x 162 x 435mm
Front Panel Height (feet removed/for rack mount) 150mm
When sizing openings in custom cabinets, measure the unit to be installed and/or allow at least 1mm clearance on all sides for unit to unit tolerances. All specifications are accurate at the time of printing. Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
27/8/08 14:22:30