Overview Surround Formats | Rotel RSX-1550 guide

English

Note: In addition to selecting analog or digital signals, the conﬁguration options also permit custom labeling and selection of a default surround mode for each of the eight inputs.

The input source buttons can also be used with the SEL button (described in the next section) to select an analog input source signal to be available at the outputs for recording, or for any of the remote zones.

Selecting a Source Input from the Front Panel 6qer

To select a source for LISTENING: Press one of the eight INPUT buttons or the MULTI INPUT button.

To select a source for RECORDING: Press the SEL button once (“RECORD” appears in the display) and then press one of the eight INPUT buttons within 5 seconds.

To select a source for Zone 2, 3 or 4: Press the SEL button two or more times to select the desired zone and then press one of the INPUT buttons within 10 seconds.

Note: See the section on Zone 2–4 operations for details of selecting a source for the remote zone.

Selecting a Source from the Remote AJU

To select a source for LISTENING in the main room: press and hold one of the DEVICE/INPUT buttons for more than one second. To select the MULTI INPUT, press and hold the EXT button.

Note: A short press of a DEVICE/INPUT button changes the remote control device only, but does not change the source input.

To select a source for RECORDING: Press the REC button (“RECORD” appears in the front panel display). Then, press and hold one of the DEVICE/INPUT buttons within 10 seconds.

Alternatively, you can press the REC button and then use the +/– buttons to scroll through the available source options. Select any input (CD, TUNER, TAPE, or VIDEO 1–5). Selecting the SOURCE option links the recording source to the input selected for main room listening. Whatever input is selected for listening is also sent to the record outputs.

To select a source for Zone 2, 3 or 4: Press the REC button two or more times to select a zone. Then, press and hold one of the DEVICE/ INPUT buttons within 10 seconds.

Alternatively, you can press the REC button to select a zone and then use the +/– buttons to scroll through the available source options. Select any input (CD, TUNER, TAPE, or VIDEO 1–5). Selecting the SOURCE option links the Zone 2, 3 or 4 source to the input selected for main room listening. Whatever input is selected for the main room is also sent to the remote zone outputs.

Note: The RR-1061 remote control can be set to send individual IR commands for each zone. Please refer to the setup manual supplied with the RR-1061 to program this function.

Party Mode: Selecting the Same Input for all Outputs erJU

You may wish to have the same input for listening, recording, and all of the remote zones. The receiver makes this conﬁguration (called Party Mode) easy by linking the inputs for recording and remote zones to the input selected for listening. When linked, changing the input selection for

listening will automatically change the input for recording and remote zones.

To activate Party Mode, press and hold the ZONE button on the front panel or Remote for at least 3 seconds. The words PARTY ON appear brieﬂy in the display and the ZONE icon ﬂashes for 10 seconds. The record input selection and all remote zone input selections will be displayed as “SOURCE”, indicating that they are linked to the input selected for listening. While in PARTY mode, a “P” indicator remains in the front-panel display.

To cancel Party Mode, press and hold the SEL button on the front panel or the REC button on the remote for at least 3 seconds. Party Mode is cancelled as indicated by the temporary display of the words PARTY OFF in the front-panel display. The recording input and the inputs for all remote zones revert to their last previous selection, no longer linked to the listening input.

You can also cancel the link for just the record output or for one individual zone by selecting a different input for that output. In this case, the input selection for the unchanged record output or remote zones remained linked to the listening input selection. Any source change cancels the “P” indicator in the display.

Selecting Digital Inputs Y

A default digital audio input can be speciﬁed for each source input using the Input Setup menu. However, you can override the default digital input for the currently selected source by pressing the D-SLT button on the remote. Each press of the button steps to the next digital input in order: OPTICAL 1, OPTICAL 2, OPTICAL 3, OPTICAL 4, COAXIAL 1, COAXIAL 2, COAXIAL 3. The actual choices you see will be limited to those inputs with an active digital signal connected, so you may not see all of the inputs listed.

Overview of

Surround Formats

To get the best performance from your unit, it helps to understand the many surround sound formats available today, to know which decoding process to use for a particular recording, and how to select it. This section provides basic background information about surround sound formats. The following sections provide detailed operating instructions for automatic and manual selection of surround modes.

Note: The RSX-1550 has built-in ampliﬁers to drive ﬁve speakers in a 5.1 channel system. To use surround modes for 6.1 or 7.1 channel systems, you will need a separate addiitional power ampliﬁer to drive one or two of the speakers.

Dolby Surround

Dolby Pro Logic II

The most widely available surround sound format for consumer audio/ video is Dolby Surround®, available on nearly all commercial VHS tapes, many television broadcasts, and most DVDs. Dolby Surround is the consumer version of the analog Dolby Stereo system ﬁrst introduced in the ﬁlm industry in 1972. It is a matrix-encoding system that records front left, front center, front right, and a mono surround channel into

a 2-channel stereo recording. During playback, a Dolby Pro Logic®

RSX-1550 English v2.indd 29

27/8/08 14:22:15