Gaggia 037RG manual Remarks on Descaling, And/or regulations in force in the country of use

Page 19

22 Hold the “

“ button pressed for

6 seconds to reset the machine and

cancel the descaling alarm signal.

Steady on

Reassemble the external part of the

Pannarello.

If the machine is switched off during the descaling cycle, next time the machine is switched

on the cycle must be repeated from the beginning.

The descaling solution must be disposed of according to the manufacturer’s instructions

and/or regulations in force in the country of use.

After completing the desca- ling cycle, wash the brew group as described in the “Brew Group” section in the “Cleaning and

maintenance” section.

Remarks on Descaling

The previous section explains the correct operations to perform to descale the machine.

The machine you have purchased is equip-

 

ped with advanced software to check the

 

 

quantity of used water in order to provide

English

reliable information about the right time

to carry out descaling operations.

 

 

This software has been programmed for

 

standard water hardness.

 

In case of especially hard water (high

 

calcium content), descaling cycles might

 

have to be carried out more frequently,

 

even if the machine does not display war-

 

ning signals.

 

Even if the machine is not used often (e.g.

 

1 coffee per day), it is recommended to

 

perform descaling cycles more frequen-

 

tly.

 

In these specific cases, it is recommended to perform descaling cycles every 1-2 months, even if the machine does not signal it.

• 39 •

Image 19
Contents Type Sup 037RG Operating InstructionsImportant Safeguards Instructions for the Power Supply Cord General Information Safety RegulationsPower Supply Power Cord For the Safety of OthersDo not use the coffee machine outdoors Storing the Machine CleaningServicing / Maintenance Fire Safety PrecautionsSelector switch Grinder adjustment knob Coffee bean hopperSTAND-BY Button Ning Cycle InstallationThat the power button is switched to Machine PackagingBrewed coffee Circuit PrimingPrime the water circuit Cycle of the internal circuitsBlink in sequence Rinse/Self-cleaning CyclePress the button to brew a long cof- fee To the positionGaggia Adapting System AdjustmentsCoffee Grinder Adjustment Intenza water filterBeen brewed Adjusting the Coffee LengthDispensing Spout Adjustment StandbyUsing Coffee Beans Aroma AdjustmentCoffee Brewing Dispensing HOT Water Using Pre-ground CoffeeWater in the steam wand Only the following icon will be displa- yed steady onTouch it with bare hands Ned and free of any milk residueNeeded to dispense coffee Cleaning and MAIN TenanceIf supplied to obtain a thorough cleaning Straight afterFill the water tank with fresh drinking water At authorised service centresBrew Group Reassemble the external part of the PannarelloPerfect working order Product Vinegar as a descaling solutionDescaling solution DescalingAt the end, fi ll the water tank again Following icon will be displayedIcon will appear on the display Remarks on Descaling Maintenance sectionAnd/or regulations in force in the country of use Control Panel Display Ready SignalsAlarm Signals Machine Actions Causes Solutions TroubleshootingSee note EC 2006/95, EC 2004/108 Technical SpecificationsMachine Disposal Packing materials can be recycledPage Français Gaggia s.p.a