FoodSaver Accessories

FoodSaver Bottle Stoppers

To release vacuum and open, turn knob on lid to Open.

and Universal Lids

Quick Marinators (with large knob on lid)

To release vacuum and open, push gray rubber button on lid.

(without large knob on lid)

FoodSaver Vacuum Packaging Canisters

FoodSaver Jar Sealer with Mason Jars

4. If vacuum packaging in a large canister, push Fast Speed Setting (P) button.

3. Lock the Latch (E) on side of appliance before vacuuming.

2. With lid closed, insert one end of Accessory Hose (A) into Port (O) on appliance. Insert other end into port on accessory. Twist gray tab while inserting to ensure a tight fit.

in bottle.

1. Always leave at least one inch of space between contents and rim.

2. Wipe rim of canister, container or bottle to ensure it is clean and dry.

Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.

How to Prepare FoodSaver Accessories for Vacuum Packaging

4. For accessories with a large knob on lid,

3. Place lid on canister or container, or place stopper

turn knob to Vacuum. Vacuum package using instructions below. When vacuum process is complete, turn knob to Closed before removing Accessory Hose (A).

5. For accessories without a large knob on lid, vacuum package using instructions below.

How to Vacuum Package with FoodSaver Accessories

1. Prepare container according to FoodSaver	5. Push the Canister Vacuum Button (Q). Motor will
Accessory Guidelines above.	run until vacuum process is complete.	Accessories
		Accessories

6. When motor turns off, gently twist and remove Accessory Hose from accessory and appliance. Unlock Latch.

7. To test vacuum, simply tug on accessory lid. It should not move.

Note: For important tips on using accessories with different foods, please refer to the FoodSaver Reference Guide.

How to Open FoodSaver Accessories after Vacuum Packaging

For use with Ball® and Kerr ® brand Mason jars.

To release vacuum and open, wedge spoon between Mason jar lid and highest part of threaded rim. Twist spoon gently to release vacuum.

IMPORTANT: Do NOT use screw bands when vacuum packaging jars.

To release vacuum and open, simply pull up on

Bottle Stopper.