Beckett Model 7505 manual Startup / Checkout, Starting the System, Check Safety Features

Page 8

Startup / Checkout

Fire Hazard

Reset and Service by Qualified

Technician only.

If the burner or control fails any of the following tests, recheck control wiring. If the burner or control still fails any tests, replace the control.

Starting the System

1.Open the shut-off valves in the supply line from the oil tank.

2.Close the disconnect switch to supply power to the burner.

3.Adjust the thermostat or boiler control to call for heat.

- If the pump has not been primed, refer to “Priming the Pump” in the “Operation” section of this manual.

4.Monitor burner operation to ensure that the burner ignites.

5.End the call for heat. Verify that the burner turns off before leaving the installation site.

Check Safety Features

◦Safe Start Check

1.Place a jumper across the cad cell terminals.

2.Refer to the steps for “Starting the System” and have the system call for heat.

3.Burner must not start. Verify that the

green light is on continuously and that the control remains in Standby mode.

4.End the call for heat and remove the cad cell jumper.

◦Simulate Flame Failure and Ignition Failure

1.Refer to the steps for “Starting the System” and have the system call for heat.

2.After flame is established and the burner igniter turns off, close the hand valve in the oil supply line.

3.At flame loss, the control will enter Recycle mode. Verify that the green light is flashing. The control will remain in Recycle for 60 seconds.

4.After the 60 second recycle period, the control will try to restart the system.

5.After the 15 second lockout time, the control will lock out the burner and the reset button will flash. Verify that the burner motor and igniter are off and that the burner oil solenoid valve (if used) is not energized.

6.Open the hand valve in the oil line.

7.Click the reset button and verify that the red light in the reset button shuts off and that the burner lights.

8.End the call for heat.

◦Before leaving the installation, verify that all thermostat and boiler/furnace control wiring is correct. Consult heating appliance manual for directions.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents GeniSys Description / ApplicationsFeatures Models and Cross Reference GuideGetting to know the control Approvals Electrical RatingsEnvironmental Ratings Wiring MountingCan cause severe injury, death, or property damage Electrical shock can cause severe personal injury or deathTypical Boiler Wiring ValveTypical Furnace Wiring Intermittent ignition, no valve-on or motor-off delaysCheck Safety Features Reset and Service by Qualified Technician onlyStartup / Checkout Starting the SystemBurner States Reset Button OperationSequence of Operation Status Lights Reset Button OperationPriming the Pump Maintenance Disable FunctionLimited Warranty Information

Model 7505 specifications

The Beckett Model 7505 is a highly regarded oil burner that delivers reliable performance, efficiency, and a variety of features that make it a popular choice for both home and commercial heating applications. This burner is designed for use with a range of heating systems, including forced air and hot water boilers, making it a versatile option for many users.

One of the standout features of the Model 7505 is its compact design. Measuring just 18 inches in height, 15 inches in width, and 22 inches in depth, this burner easily fits into tight spaces, allowing for flexible installation options. The burner is equipped with a powerful 0.75 GPH nozzle, which is capable of delivering up to 140,000 BTUs per hour, making it suitable for a variety of heating needs.

The Model 7505 incorporates advanced combustion technology, designed to optimize fuel efficiency and minimize emissions. The burner features a high-efficiency combustion head that helps to ensure a complete burn of the oil, leading to lower fuel consumption and reduced greenhouse gas emissions. This commitment to efficiency not only helps the environment but also translates to savings on fuel costs for users.

Moreover, the Beckett Model 7505 comes with a unique primary control unit that enhances the burner's safety and performance. This control unit features an integral reset button, an adjustable primary air setting, and an LED indicator light that provides at-a-glance status updates on operations. These smart features simplify troubleshooting and ensure safe operation of the heating system.

In addition to its impressive performance capabilities, the Model 7505 is designed for durability. Constructed with high-quality materials, including a robust steel casing and a corrosion-resistant finish, this oil burner can withstand the rigors of regular use in various environments.

Maintenance is also made easy, thanks to the removable panels and access points that allow for quick and efficient servicing. Beckett's reputation for reliability and longevity makes the Model 7505 a wise investment for those seeking a dependable heating solution.

Overall, the Beckett Model 7505 stands out with its combination of efficiency, safety, and ease of use. Whether for heating residential properties or commercial spaces, the Model 7505 continues to be a go-to choice for many satisfied customers.
Top Page Image Contents