Beckett Model 7505 manual Mounting, Wiring, Can cause severe injury, death, or property damage

Page 5

Fire or Explosion

Hazard

Can cause severe injury, death, or property damage.

•The control can malfunction if it gets wet, leading to accumulation of oil or explosive oil vapors.

•Never install where water can flood, drip or condense on the control.

•Never use a control that has been wet - replace it.

Electrical Shock

Hazard

Electrical shock can cause severe personal injury or death.

•Disconnect ALL electrical power to the appliance/burner circuit before installing or servicing this control.

•Provide ground wiring to the appliance, burner and metal control mounting box.

•Perform all wiring in compliance with the National Electrical Code ANSI/NFPA 70 (Canada CSA C22.1).

Explosion, Fire,

Scald, and Burn

Hazard

All heating appliances must have HIGH LIMIT protection to interrupt electrical power and shutdown the

burner if operating or safety controls fail and cause a runaway condition.

•Follow the appliance manufacturer’s wiring diagrams and note all required safety controls.

•Typical safety controls include high temperature or pressure limits, low water cutoffs, pressure relief valves and blocked flue sensing switches.

•Verify all limit and safety controls are installed and functioning correctly, as specified by the manufacturer, applicable safety standards, codes and all authorities having jurisdiction.

•Ensure that the appliance is free of oil and oil vapor before starting or resetting the burner.

Incorrect Wiring

Will Result in

Improper Control Operation

•GeniSys wiring label colors may not match the wire colors of the burner or other manufacturers’ controls.

•The GeniSys Control should be wired according to the appliance manufacturer’s instructions.

Mounting:

◦Mount the control on a 4” x 4” junction box on the burner, or inside the appliance cabinet. In replacement applications, mount the new control in the same location as the old control. In some replacement applications, it may be necessary to rotate the control on the 4” x 4” box for best fit.

◦Mounting orientation: any orientation is acceptable.

Wiring:

◦Make sure all appliance wiring complies with all local codes and ordinances.

◦Make connections to the control’s terminals as shown in Figures 2 through 9. Refer to the label on the underside of the control for wiring details.

Some Thermostats Are Polarity

Sensitive. Reversed polarity could cause erratic cycling of the burner control.

◦Connect the wire from the RH or R terminal on the thermostat to the TR terminal on the control (if applicable).

◦Connect the wire from the W terminal on the thermostat to the TW terminal on the control (if applicable).

120v GeniSys Control Installation and Operation Manual

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Description / Applications GeniSysModels and Cross Reference Guide FeaturesGetting to know the control Approvals Electrical RatingsEnvironmental Ratings Mounting WiringCan cause severe injury, death, or property damage Electrical shock can cause severe personal injury or deathValve Typical Boiler WiringIntermittent ignition, no valve-on or motor-off delays Typical Furnace WiringReset and Service by Qualified Technician only Check Safety FeaturesStartup / Checkout Starting the SystemBurner States Reset Button OperationSequence of Operation Status Lights Reset Button OperationPriming the Pump Disable Function MaintenanceLimited Warranty Information

Model 7505 specifications

The Beckett Model 7505 is a highly regarded oil burner that delivers reliable performance, efficiency, and a variety of features that make it a popular choice for both home and commercial heating applications. This burner is designed for use with a range of heating systems, including forced air and hot water boilers, making it a versatile option for many users.

One of the standout features of the Model 7505 is its compact design. Measuring just 18 inches in height, 15 inches in width, and 22 inches in depth, this burner easily fits into tight spaces, allowing for flexible installation options. The burner is equipped with a powerful 0.75 GPH nozzle, which is capable of delivering up to 140,000 BTUs per hour, making it suitable for a variety of heating needs.

The Model 7505 incorporates advanced combustion technology, designed to optimize fuel efficiency and minimize emissions. The burner features a high-efficiency combustion head that helps to ensure a complete burn of the oil, leading to lower fuel consumption and reduced greenhouse gas emissions. This commitment to efficiency not only helps the environment but also translates to savings on fuel costs for users.

Moreover, the Beckett Model 7505 comes with a unique primary control unit that enhances the burner's safety and performance. This control unit features an integral reset button, an adjustable primary air setting, and an LED indicator light that provides at-a-glance status updates on operations. These smart features simplify troubleshooting and ensure safe operation of the heating system.

In addition to its impressive performance capabilities, the Model 7505 is designed for durability. Constructed with high-quality materials, including a robust steel casing and a corrosion-resistant finish, this oil burner can withstand the rigors of regular use in various environments.

Maintenance is also made easy, thanks to the removable panels and access points that allow for quick and efficient servicing. Beckett's reputation for reliability and longevity makes the Model 7505 a wise investment for those seeking a dependable heating solution.

Overall, the Beckett Model 7505 stands out with its combination of efficiency, safety, and ease of use. Whether for heating residential properties or commercial spaces, the Model 7505 continues to be a go-to choice for many satisfied customers.
Top Page Image Contents