Berkel B32, CC34, C32 manual Cutting Tools and Chopping Knife, Materials, Net Weights

Page 14

Cutting Tools and Chopping Knife:

1.the diameter of the cutting tools is 7.25 in.

2.the diameter of the chopping knife is 6.70 in.

1.the machine base is made of aluminium.

2.the continuous feed attachment:

•Housing: Polycarbonate

•ejector plate: acetal

•cutting tool discs: robust acetal, polysulphone, polyutherane or aluminium

•cutting tool blades: Stainless Steel

3.the bowl cutter/mixer attachment:

•Bowl: Stainless Steel

•Knife hub: acetal

•Knife blades: Stainless Steel

•Lid: polycarbonate

•Scraper: polysulfone.

1.machine base: 20.0 lbs.

2.Vegetable preparation attachment complete but excluding cutting tools: 2.2 lbs.

3.cutting tools: approx. 0.9 lb average.

4.Fast chopping attachment complete but excluding knife: 3.0 lbs.

– 14 –

Image 14

Contents CC34 C32 B32 Before Using This eqUipmenT Ings Related to Your Personal Safety are Indicated byTaBle of ConTenTs General safeTy insTrUCTions InsTrUCCiones generales de segUridadEqUipmenT desCripTion Page Special Features/Characteristics InTended Uses and CharaCTerisTiCsUnpaCking and insTallaTion Intended UsesContinuous Feed Operation OperaTionGeneral Removing the Feeder Choice of Cutting Tools When Processing With the FeederInstalling the Feeder Bowl ProcessingRemoving the Bowl Installing the BowlUsing the Variable Speed Control Machine Overheats CleaningTroUBleshooTing Cutting Tool Cannot Be Removed When Using the Feeder SpeCifiCaTionsLow Capacity or Poor Processing Results When Using the Bowl Type of ProcessingMachine Base Capacity and VolumeUsers Controls and SpeedsMaterials Net WeightsCutting Tools and Chopping Knife OpTional aCCessories Accessory Part NumberWarranTy