Berkel B32 Before Using This eqUipmenT, Ings Related to Your Personal Safety are Indicated by

Page 2

Before Using This eqUipmenT

Berkel’s Food processors are designed to process fruits, vegetables and other food products safely and efficiently. However, unless the operator is properly trained and supervised, there is the possibility of a serious injury. it is the re- sponsibility of the owner to ensure that this food processor is used properly and safely, strictly following the instructions contained in this manual and any requirements of local law.

No one should use or service this food processor without proper training and supervision. all operators should be thoroughly familiar with the procedures contained in this manual. even so, Berkel cannot anticipate every circum- stance or environment in which its food processors will be used. You, the owner and/or operator, must remain alert to the hazards posed by the function of a food processor—particularly the sharp, cutting tools. No one under 18 years of age should operate this equipment. if you are uncertain about a par- ticular task, ask your supervisor.

this manual contains a number of safe practices in the General Safety instruc- tion Section. additional warnings are placed throughout this manual. WARN-

INGS RELATED TO YOUR PERSONAL SAFETY ARE INDICATED BY:

if any warning label, wall chart or manual becomes misplaced, damaged or illegible, please contact your nearest distributor or Berkel directly, for a free replacement.

remember, however, THIS MANUAL OR THE WARNING LABELS

DO NOT REPLACE THE NEED TO BE ALERT AND TO USE YOUR COMMON SENSE WHEN USING THIS FOOD PROCESSOR.

– 2 –

Image 2
Contents CC34 C32 B32 Before Using This eqUipmenT Ings Related to Your Personal Safety are Indicated byTaBle of ConTenTs General safeTy insTrUCTions InsTrUCCiones generales de segUridadEqUipmenT desCripTion Page Special Features/Characteristics InTended Uses and CharaCTerisTiCsUnpaCking and insTallaTion Intended UsesContinuous Feed Operation OperaTionGeneral Removing the Feeder Choice of Cutting Tools When Processing With the FeederInstalling the Feeder Bowl ProcessingRemoving the Bowl Installing the BowlUsing the Variable Speed Control Machine Overheats CleaningTroUBleshooTing Cutting Tool Cannot Be Removed When Using the Feeder SpeCifiCaTionsLow Capacity or Poor Processing Results When Using the Bowl Type of ProcessingMachine Base Capacity and VolumeUsers Controls and SpeedsMaterials Net WeightsCutting Tools and Chopping Knife OpTional aCCessories Accessory Part NumberWarranTy