Asko D3mmmXL installation instructions Moving the Machine Into Place

Page 7

MOVING THE MACHINE INTO PLACE

WARNING!

Make sure you put the protective slides on the legs to prevent damaging the floor when you slide the unit into place (see page 6).

1.Position the machine in front of the cabinet opening.

2.Make the height adjustment while the dishwasher is in front of the opening.

3.Pull out the drain hose to ensure there are no sharp bends.

4.Start to feed water and drain lines and electric cord (if necessary) into the access hole in the cabinet.

5.Gently slide the unit into the dishwasher opening. As you do this, feed the drain line and inlet hose into the access hole in the side of the cabinet.

As you slide the unit into place, feed the drain line and inlet hose into the access hole in the side of the cabinet.

WARNING! Be careful of sharp edges.

Page 7

Image 7
Contents Asko ContentsTools Technical DataIntroduction What YOU NeedPreparing the Location DimensionsUnit Dimensions European InstallationsWater Supply Corner InstallationEasyinstall Connections Installing the TIP Guards OptionalImportant Things to Remember Three Ways to Install Drain ConnectionsDrain Connections High LoopSlides for Legs Preparing the Dishwasher for InstallationElectrical Connections Grounding InstructionsMoving the Machine Into Place Connecting the Water Supply Connecting the Electric CableTesting for Leaks Fastening the Dishwasher to the Cabinet Adjusting the Leveling LegsInstalling the TOE Kick Setting the TOE Kick DepthItems Provided with the Unit Custom Panel DimensionsPreparing the Wood Panel for Mounting Mounting the Wood Panel Adjusting the Door SpringsIndex Installation options on FI units Installing