American Panel AP20BC175-2 user manual Wiring Diagrams, Cleaning The Condenser

AP20BC175-2 Manual

CLEANING THE CONDENSER

For correct and efficient operation of the blast chiller, it is necessary that the condenser be kept clean so that air can circulate around it freely and come into contact with the whole of its surface.

	This operation (to be
	performed every 30 days,
	max.) can be accomplished
	using a brush (non-metallic)
	to remove all the dust and
	dirt from the condenser fins.
	Remove the finned grid to
	gain access to the
Fig. 1	condenser.

CLEANING THE STORAGE COMPARTMENT

Clean the inside of the storage com- partment daily to avoid altering the taste and aroma of the food.

Clean the inside, the grid supports and the grids with a non-corrosive detergent and then rinse thoroughly.

The storage compartment and its internal components have been designed to aid all cleaning operations.

Clean the outside surfaces regularly with a detergent for stainless steel and dry using a soft cloth.

Always defrost the unit (see manual).

DO NOT USE ABRASIVES, SOLVENTS

OR GLASS WOOL (Fig. 3).

	Avoid using sharp implements and
Fig.2	abrasives, especially when cleaning the
	evaporator (Fig. 2).

NOTE: If additional refrigerant should be needed, be certain to use the
correct type and amount as shown on the nameplate.	Fig. 3

WIRING DIAGRAMS

30