INSTALLATION
INSTRUCTIONS
ALCOVES | ISLANDS |
Rectangular
Models
↔
Corner
Models
↔
A
Oval
Models
↔
Measurements should be taken directly from the tub.
Deck Cutout:
A paper template will be enclosed with all oval models. For the deck cutout, scribe on the deck two center lines (a major and minor axis). Next, match the center lines and trace the ellipse. Repeat this step three more times. Once the tracing is complete, cut out the ellipse. The dimensions should be exactly 2” smaller than the unit.
A - 6” x 12” (150 x 305)
B - Leveled Supports
1” x 3” (25 x 75) Ledgers C - 12” x 18” (305 x 460)
minimum Access
10 | Aquatic Industries, Inc. |