Preparing your machine for first use
COFFEE PREPARATION
EN
First read the safety precautions to avoid risks of fatal electrical shock and fire.
1. Fully insert cup support into upright position, remove | 2. Adjust cord length and store excess under machine with | 3. Ensure steam handle is set to off, and steam pipe in |
maintenance unit and water tank. | cord storage fixation.* | vertical position. |
4. Close lever and plug into mains. | 5. Rinse and fill water tank with potable water. Reposition | 6. Switch machine on. |
| water tank and maintenance unit. |
|
Blinking lights: heat up (25 sec.)
Steady: ready
1. Rinse and fill water tank with potable water. | 2. Reposition water tank . | 3. Close lever and switch machine on. |
Blinking lights: heat up (25 sec.)
Steady: ready
4. Lift lever and insert Nespresso capsule. | 5. Close lever and place cup under coffee outlet. | 6. Cup support can be turned up right to support Macchiato |
|
| glass. |
7. Lift cup support and place container (min. 0.5L) under | 8. Set Lungo button to 5 and press to rinse the machine. |
coffee outlet. | Repeat 3 times. |
*NOTE: for this operation only, machine can be placed on it’s side on a soft surface to avoid any damage to the finishing.
7.Turn dial to desired coffee level and press button to start brewing.
8. The preparation will stop automatically, or press any | 9. Remove cup. Lift and close lever to eject capsule into |
coffee button to stop the preparation at any time. | container. |
1: 25 ml | 1: 70 ml |
2: 30 ml | 2: 90 ml |
3: 40 ml | 3: 110 ml |
4: 50 ml | 4: 130 ml |
5: 60 ml | 5: 150 ml |
NOTE: automatic power off: machine stops automatically after 9 minutes of
Note: during heat up (blinking lights), you can press the coffee button. Coffee will start to flow automatically when machine is ready. | 10 | |
During coffee preparation, steam function is not possible. | ||
11 | ||
|
5927_MAESTRIA_MASTER_2012_v12.indd
07.02.13 14:55