Monessen Hearth VFCS20DNV, VFCS30DNV, VFCS30DPV manual Important Safety Information, Installer Owner

Page 3

 

IMPORTANT SAFETY INFORMATION

 

 

 

 

INSTALLER

OWNER

Please leave these instructions with the appliance.

Please retain these instructions for future reference.

IMPORTANT

warning

Read these instructions carefully before installing or trying to operate this vent-free gas heater.

•Any change to this heater or its controls can be dangerous.

•Improper installation or use of the heater can cause serious injury or death from fire, burns, explosion or carbon monoxide poisoning.

•Do not allow fans to blow directly into the stove. Avoid any drafts that alter burner flame patterns.

•Do not use a blower insert, heat exchanger insert or other accessory, not approved for use with this heater where applicable.

1.Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.

2.Children and adults should be alerted to the hazard of high surface temperature and should stay away to avoid burns or clothing ignition.

3.Young children should be carefully supervised when they are in the same room with the appliance.

4.Do not place clothing or other flammable material on or near the appliance.

5.Any safety screen or guard removed for servicing an appli- ance, must be replaced prior to operating the heater.

6.Installation and repair should be done by a qualified ser- vice person.

7.To prevent malfunction and/or sooting, an unvented gas heater should be cleaned before use and at least annually by a professional service person. More frequent clean- ing may be required due to excessive lint from carpet- ing, bedding material, etc. It is imperative that control compartments, burners and circulating air passageways be kept clean.

8.CARBON MONOXIDE POISONING: Early signs of carbon monoxide poisoning are similar to the flu with headaches, dizziness and/or nausea. If you have these signs, obtain fresh air immediately. Have the heater serviced as it may not be operating properly.

9.The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas

Code, ANSI Z223.l/NFPA54.

10. This unit complies with

ANSI Z21.11.2 Unvented

Heaters.

 

11.Do not install heater in a bathroom or bedroom unless approved for bedroom use.

12.Correct installation of the ceramic fiber logs, proper location of the heater, and annual cleaning are neces- sary to avoid potential problems with sooting. Sooting, resulting from improper installation or operation, can settle on surfaces outside the fireplace. See log placement instructions for proper installation.

13.Avoid any drafts that alter burner flame patterns. Do not allow fans to blow directly into fireplace. Do not place a blower inside burn area of firebox. Ceiling fans may create drafts that alter burner flame patterns. Sooting and improper burning will occur.

14.Caution: Candles, incense, oil lamps, etc. produce combustion by-products including soot. Vent-free appli- ances will not filter or clean soot produced by these types of products. In addition, the smoke and/or aromatics

(scents) may be reburnt in the vent-free appliance which can produce odors. It is recommended to minimize the use of candles, incense, etc. while the vent-free appliance is in operation.

15.This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be pro- vided. See page 8.

Continued on page 4

58D6002

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Natural Gas or Propane/LPG Milli-Volt Control What to do if YOU Smell GASRead and Save These Instructions Contents Installer Owner Important Safety InformationImportant Safety Information Handle Here Product featuresHandle Door21 1 26 3 28 1 16 1 19 3 DimensionsMake sure you have received all parts What you will need for installationProduct Specifications Natural GasPropane / LPG General Installation Information CodesAdequate Combustion and Ventilation AIR L1 = 151/2 Ft., L2 = 12 Ft., W = 12 Ft., H = 8 Ft Counter Cast Iron StoveSide View Corner Installation Wall InstallationClearances / Height Requirements Front ViewVF20 38½ VF30 Tested Minimum Alcove Dimensions Height FromClearances / Height Requirments WidthAsh Lip Control Door Removing Unit from CratePlastic Bag Pallet Hearth DoorManual Shutoff Gas Supply Inlet Valve Connecting the GASExplosion Checking GAS Pressure and connecting remote receiverConnecting directly to an unregulated Propane/L.P.G. tank can cause anElectrical Wiring Milli-volt LOG Placement Bend in Rock Wool Tray Rock Wood LOG PlacementThermocouple For Natural For LP Flame appearanceChecking pilot flame Milli-volt ControlMiddle Log Flame AppearanceChecking Burner Flame Operating InstructionsOff/Pilot/On Knob Optional Operating InstructionsMILLI-VOLT Control Lighting Instructions Cleaning and Servicing Operating Instructions and Cleaning and ServicingReplacement parts Description Qty Natural Propane Replacement Parts listBurner assembly VF20Failure to use only parts specifically Burner assembly VF30Accordance with these diagrams or Failure to position the parts58D0061 58D0056 Union Tee 43D018158D0193 58D0435Description Qty VF30 LogsSymptom Possible Cause Action TroubleshootingWhen con Carbon Monoxide Detector Requirements Limited Lifetime Warranty

VFCS20DNV, VFCS20DPV, VFCS30DPV, VFCS30DNV specifications

Monessen Hearth has long been synonymous with high-quality and efficient heating solutions, and their range of direct-vent gas fireplaces, including the VFCS30DNV, VFCS30DPV, VFCS20DPV, and VFCS20DNV models, exemplify this commitment. These fireplaces offer both aesthetic appeal and advanced technology, making them suitable for any home.

One of the key features of the VFCS series is its impressive heat output. The VFCS30DNV and VFCS30DPV are designed to deliver substantial warmth, making them ideal for larger spaces. With a heat output of up to 30,000 BTUs, these models ensure consistent and comfortable heating during the cold months. The VFCS20 variants, while slightly smaller, still provide a robust performance with a maximum output of 20,000 BTUs, making them perfect for cozy living rooms or smaller areas.

In terms of design, these fireplaces are incredibly versatile, featuring sleek and modern aesthetic options. The VFCS models come with a wide viewing area, framed with stylish surrounds, which allows for an expansive view of the mesmerizing flame patterns. Additionally, they offer a choice of interior finishes like traditional brick or contemporary black, letting homeowners customize their fireplace to match their interior décor.

Incorporating advanced technology, these fireplaces use a direct vent system, ensuring efficient combustion and optimal heat distribution. This system allows for the safe venting of gases outside, creating a cleaner and healthier indoor atmosphere. The fireplaces operate on natural gas or propane, providing flexibility based on the homeowner's preferences and availability.

Moreover, Monessen Hearth's VFCS models are equipped with user-friendly controls, enhancing the overall functionality. The optional remote control and wall switch make it easy to operate the fireplace, allowing users to adjust the flame height and heat output according to their comfort level without the need to leave their seat.

Energy efficiency is another hallmark of these fireplaces. With high-efficiency ratings, they provide significant savings on heating bills while delivering a cozy environment. The multi-functionality of the VFCS series also allows for the addition of decorative elements, such as glass media or logs, further enhancing the atmospheric appeal.

In summary, Monessen Hearth's VFCS30DNV, VFCS30DPV, VFCS20DPV, and VFCS20DNV models bring together aesthetics, efficiency, and advanced technology, making them an exceptional choice for anyone looking to add warmth and elegance to their home. Whether for heating a spacious area or a snug room, these direct-vent gas fireplaces meet a variety of needs with style and reliability.
Top Page Image Contents