Melitta MB80 Before Using Your Mill & Brew Coffeemaker, Setting the Clock, Brewing Instructions

Before Using Your Mill & Brew

Coffeemaker

CAUTION: UNPLUG FROM OUTLET

COFFEEMAKER: Clean the decanter and its lid, mill/brew basket and its lid, and mill/brew assembly. See Care and Cleaning.

Fill the coffeemaker with the maximum amount of water and no coffee and turn the unit ON. See Brewing. Unplug coffeemaker and discard the water. Wait 10 minutes to allow heating elements to cool. Repeat this process one more time.

CAUTION: DO NOT IMMERSE CORD, PLUG OR COFFEEMAKER BASE IN WATER OR OTHER LIQUID.

CAUTION: BLADES ARE SHARP. DO NOT ATTEMPT TO DISASSEMBLE MILL & BREW ASSEMBLY.

Setting the Clock

1.Set the clock for actual time of day. Press and hold “HR” button for 2 seconds. The LED display will flash and unit will enter into the clock-setting mode. Press “HR” and “MIN”buttons to set correct time. Small dot in upper left corner of display signifies

A.M. No dot indicates P.M. The clock display will flash 5 times, then stop. The time is now set.

Brewing Instructions

CAUTION: DO NOT FILL MILL/BREW BASKET WITH MORE THAN 8 SPOONS OR 21⁄8 OUNCES OF COFFEE BEANS. ARROW ON BASKET INDICATES MAXIMUM CAPACITY. DO NOT FILL

MILL/BREW BASKET WITH MORE THAN 8 SPOONS OR 23⁄4 OUNCES OF GROUND COFFEE.

1.Plug into 120V-60 Hz outlet. You do not have to set clock or timer to brew.

2.Fill decanter with cold water and pour desired number of cups into water reservoir. Use markings on water window to gauge level of water required to brew desired number of 5-ounce cups. The number 10 at the top indicates maximum 10-cup yield. Replace decanter on warming plate.

3.Open mill/brew assembly lid and grasp mill/brew basket tabs to remove basket lid. Place 1 measuring spoon roasted whole bean

5