LP Cylinder Removal, Transport and Storage

Retainer Strap

CARE AND USE

DANGER

•NEVER store a spare LP cylinder under or near the appliance or in an enclosed area.

•Never fill a cylinder beyond 80% full.

•An over filled or improperly stored cylinder is a hazard due to possible gas release from the safety relief valve. This could cause an intense fire with risk of property damage, serious injury or death.

•If you see, smell or hear gas escaping, immediately get away from the LP cylinder/appliance and call your fire department.

•Keep LP tank at a minimum distance of 24” (inches) away from appliance at all times.

24”

• A disconnected LP cylinder in LP Cylinder Valve
storage or being transported
must have a safety cap installed (as shown).
Do not store an LP cylinder in enclosed spaces
such as a carport, garage, porch, covered	Safety
patio or other building. Never leave an LP cylinder	Safety
inside a vehicle which may become overheated	Cap
inside a vehicle which may become overheated

by the sun.

• Do not store an LP cylinder in an area where children play.

LP Cylinder

•The LP cylinder used with your appliance must meet the following requirements:

•Use LP cylinders only with these required measurements: 12" (30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) capacity maximum.

•LP cylinders must be constructed and marked in accordance with specifications for LP cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and commission, as applicable. See LP cylinder collar for marking.

•LP cylinder valve must have:

• Type 1 outlet compatible with

	regulator or appliance.
•	Safety relief valve.
•	UL listed Overfill Protection	OPD Hand Wheel
	Device (OPD). This OPD safety	OPD Hand Wheel
	Device (OPD). This OPD safety

feature is identified by a unique triangular hand wheel. Use

only LP cylinders equipped with this type of valve.

•LP cylinder must be arranged for vapor withdrawal and include collar to protect LP cylinder valve. Always keep LP cylinders in upright position during use, transit or storage.

LP Cylinder Removal, Transport and Storage

•Turn OFF the control knob and LP cylinder valve. Turn coupling nut counterclockwise by hand only - do not use tools to disconnect. Install safety cap onto LP cylinder valve. Always use cap and strap supplied with valve. Failure to use safety cap as directed may result in serious personal injury and/or property damage.

LP (Liquefied Petroleum Gas)

•LP gas is nontoxic, odorless and colorless when produced. For Your Safety, LP gas has been given an odor (similar to rotten cabbage) so that it can be smelled.

•LP gas is highly flammable and may ignite unexpectedly when mixed with air.

LP Cylinder Filling

•Use only licensed and experienced dealers.

•LP dealer must purge new cylinder before filling.

•Dealer should NEVER fill LP cylinder more than 80% of LP cylinder volume. Volume of propane in cylinder will vary by temperature.

•A frosty regulator indicates gas overfill. Immediately close LP cylinder valve and call local LP gas dealer for assistance.

•Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.

•To remove gas from LP cylinder, contact an LP dealer or call a local fire department for assistance. Check the telephone directory under “Gas Companies” for nearest certified LP dealers.

Page 5

11101706 specifications

The Char-Broil 11101706 is a versatile gas grill designed to elevate outdoor cooking experiences, integrating user-friendly features and advanced technology. This model is part of Char-Broil's renowned lineup, recognized for its reliability and innovative designs suitable for both novices and seasoned grillers.

One of the main features of the Char-Broil 11101706 is its ample cooking space. With a primary cooking area of 360 square inches, it offers plenty of room to prepare meals for family gatherings or outdoor parties. The grill also includes a 170-square-inch swing-away warming rack, perfect for keeping food warm or toasting buns while the main dish finishes cooking.

At the heart of the Char-Broil 11101706 is the TRU-Infrared cooking technology. This unique system allows for even heat distribution across the cooking surface, eliminating hotspots while also reducing flare-ups. The TRU-Infrared design ensures moisture retention in food, resulting in juicier and more flavorful meals. This technology is especially ideal for cooking meats, ensuring that they remain tender and succulent.

The grill features a push-to-start electronic ignition system, making it easy to ignite the burners with just the push of a button. This user-friendly aspect saves time and enhances the overall grilling experience. The Char-Broil 11101706 is also equipped with three stainless steel burners, providing a total output of 30,000 BTUs, allowing for precise heat control across various cooking methods.

Moreover, construction quality plays a crucial role in the durability of the Char-Broil 11101706. The lid and firebox are crafted from sturdy steel, ensuring longevity while withstanding various weather conditions. The porcelain-coated grates contribute to easy cleaning and rust resistance, maintaining the grill's aesthetics and performance over time.

For those who enjoy experimenting with flavors, this grill also features side shelves for extra workspace and convenience. Additional elements, such as integrated temperature gauges and the option for a side burner, enhance the versatility of the grill.

In summary, the Char-Broil 11101706 is designed with performance, convenience, and durability in mind. With its innovative TRU-Infrared technology, substantial cooking space, and user-friendly features, it stands out as an outstanding option for anyone looking to enhance their outdoor cooking adventures. Ideal for backyard barbecues or weeknight dinners, this grill delivers exceptional results, making it a reliable companion for many enjoyable meals outside.