Using the JUG, Drip Stop, Cleaning, Decalcifying

-Open the water container lid. Pour in the desired amount of water. Please observe that you can pour more water in the coffee maker than in the jug. The water level is indicated on the water container.

-NOTE: Make sure that water is NOT exceeding the "8-10" indication on the water level indicator on the side of the water container, as this may result in coffee spilling over the jug.

-Put the water container back in place making sure it is properly fixed and close the water container lid.

-Press the release knob. Insert a 1x4 cone shaped paper filter into the filter basket. Place the desired amount of ground coffee into the paper filter.

-Push the filter basket back in place.

-Place the jug under the drip-stop.

-Press the brewing button - the red indicator light will turn on. This indicates that the coffee maker has started brewing.

-The coffee maker automatically stops after brewing.

-If you wish to brew more coffee immediately after the first brewing has stopped let the appliance cool off for 3- 4 minutes and follow the above points.

-When you have finished brewing coffee remove the plug from the mains outlet.

USING THE JUG

There is a pointer on the lid. (Hvad betyder dette, Erik, hvis det er en pil, så foreslår jeg "direction indicator" istedet.)

The lid must be turned firmly on the jug when you have finished brewing coffee in order to ensure that the coffee stays as hot as possible. To pour from the jug press the red "easy-to-pour" lever.

DRIP STOP

Your coffee maker has been designed with an drip stop feature. If you wish at any time during the brewing cycle, you may temporarily remove the jug from the unit and pour a hot cup of coffee. The brewing cycle will be interrupted and no coffee will drip from the filter basket. Simply by replacing the jug on the plate the brewing process will be restarted.

Do not remove the jug for longer than 30 seconds.

CLEANING

-Make sure the coffee maker is switched off and cooled off before each cleaning.

-The jug and basket may be washed in hot soapy water.

-Wipe the coffee maker base with a soft, slightly damp cloth. Never use abrasive scouring pads or cleaners as they will scratch and/or discolour the finish.

DECALCIFYING

-Mineral deposits can clog your coffee maker. To keep your coffee maker operating efficiently, you must regularly clean out mineral deposits left by the water. They can build up and clog your coffee maker. At least once a month use the household cleaning solution described below to prevent such clogging.

-You should clean your coffee maker every two weeks if the water in your area is especially hard. Frequent cleaning may improve the coffee flavour as well as the brewing time.

HOUSEHOLD CLEANING SOLUTION.

-Pour 1 quart of white vinegar into the jug. Then fill up the jug with cold water. Pour water and vinegar into the water tank.

-Place jug on the plate. Switch on the coffee maker.

645-056 specifications

The Butler 645-056 is a cutting-edge technological marvel designed for optimal performance and efficiency in a variety of applications. This versatile machine has gained popularity among users due to its advanced features, innovative technologies, and reliability, making it a top choice in its category.

One of the primary characteristics of the Butler 645-056 is its robust design. Crafted from high-quality materials, it is built to withstand harsh working conditions while ensuring longevity. Its durable structure is complemented by an ergonomic layout, allowing users to operate the machine comfortably, even during extended periods.

Powering the Butler 645-056 is an advanced engine that delivers exceptional performance. The engine is engineered for maximum efficiency, reducing fuel consumption while providing ample horsepower. This efficiency not only translates to cost savings for the user but also contributes to a lower environmental impact, aligning with modern sustainability goals.

Incorporating cutting-edge technologies, the Butler 645-056 features a state-of-the-art control system. This system enhances operational precision and allows for intuitive use, with user-friendly interfaces that streamline the control process. The integration of smart sensors provides real-time feedback, enabling operators to monitor performance metrics and make informed decisions on the fly.

Another notable feature is the machine's adaptability. The Butler 645-056 can be customized with a variety of attachments, allowing it to perform multiple tasks effortlessly. This versatility is crucial for users who require a machine that can handle different jobs without the need for extensive retooling or investment in additional equipment.

Safety is paramount in the design of the Butler 645-056. It incorporates advanced safety mechanisms, including emergency shutdown systems and protective shielding, to safeguard both operators and the equipment itself. These features ensure compliance with industry safety standards while promoting a secure work environment.

In summary, the Butler 645-056 stands out due to its combination of durability, efficiency, innovative technology, adaptability, and safety. Whether used in construction, agriculture, or other demanding industries, this machine delivers unmatched performance and reliability, making it an essential asset for any operation. As advancements in technology continue, the Butler 645-056 remains a benchmark for excellence in its field.