Mixer Setup, Installation Tips | Kuhn Rikon 3100 instruction

3100ST 006046 010507

MIXER SETUP

READ AND FOLLOW THESE INSTRUCTIONS WHEN SETTING UP THE MIXER.

To avoid personal injury: The hopper floor may be slippery and the augers or reel can spin unexpectedly when stepped on. Use caution when stepping or standing inside the unit; put a protective cover over the auger knives.

INSTALLATION TIPS

1.Be sure there is adequate clearance around the mixer for maintenance, repair and loading the mixer.

2.If the electronic weighing system is used, be sure that the weigh bars are kept clean and dry. Also be sure items such as loading conveyors are not attached to or leaning on the mixer. Refer to scale manual for more specific information.

3. Mixer should be mounted on a structure of adequate strength to support a fully loaded mixer. Machine must be level and stable at the desired height. Weigh bar mounts should be fastened to this structure.

4. Manual door opener for the 3115 & 3120 can be mounted at either the front or the rear of the mixer. The following instructions will help to modify the door opener for operation from the opposite end:

A. Remove latch and mounting bolt and install to opposite end of mixer in corresponding hole. B. Remove door wheel assembly.

C. With door in fully closed position, cut door wheel shaft to proper length, drill mount hole, slide into position and replace bolt.

5.The 3125, 3130, 3136, 3142, 3150, 3160 and 3170 manual door opener is in a fixed position on the drive end of the mixer.

6.An optional remote electric door actuator is also available for the 3115 and 3120 models. An electric/hydraulic power pack is available for the 3125 through 3170 models. The power pack is standard on the 3195.

NOTE: When wiring the electric/hydraulic power pack, make sure to wire it to a switched source and ensure it only runs when the door is activated.

Electric Motor Recommendations

Following is a listing of suggested motor and frame sizes. Ratings are based on “normal dairy feed rations”. Con- tact the factory if intending to mix heavier loads such as feedmill use, heavy/sticky beef rations or industrial use. A smaller motor may be adequate for easy-mixing materials and a larger motor may be required for difficult materials. Wiring and overload protection should be sized according to the motor size installed. The motor mount will fit the recommended motor size. Other motor sizes may require additional holes to be drilled in the mount or a different mount assembly. Dual motor mount, frame and shield are standard on 3125, 3130, 3136 & 3142 models.

All models are designed to be used with a motor operating at 1725-1750 RPM.


MODEL	*HORSEPOWER	MOTOR	STANDARD		OPTIONAL
MODEL	*HORSEPOWER	FRAME SIZE	MOTOR BUSHING		MOTOR BUSHING
		FRAME SIZE	MOTOR BUSHING		MOTOR BUSHING
3115	7.5 - 10	213T - 215T	1-3/8”		1-1/8”
3120	10	215T - 254T	1-3/8”		1-5/8”
3125	10	254T - 256T	1-5/8”		1-3/8”
3130	10 - 15	254T - 256T	1-5/8”		1-3/8”
3136	15 - 20	256T - 284T	1-5/8”		1-7/8”
3142	15 - 25	284T - 286T	1-7/8”		2-1/8”
3150	50	326T	2-1/8”		2-1/8”
3160	60	364T	2-3/8”		2-3/8”
3170	70	365T	2-3/8”		2-3/8”
3195	100	N/A	2-7/8”		- -
A smaller motor may be adequate for easy-mixing materials and a larger motor may be required for difficult materials
16		© Copyright 2004 Kuhn Knight, Inc.		Back to Table of Contents

3100 specifications

The Kuhn Rikon 3100 is an innovative kitchen tool that epitomizes functionality, design, and performance. Renowned among culinary enthusiasts, this Swiss-made product has garnered attention for its versatile capabilities and user-friendly features.

One of the main features of the Kuhn Rikon 3100 is its robust construction. The product is crafted from high-quality materials, ensuring durability and longevity even with regular use. The handle is ergonomically designed, providing a comfortable grip that reduces strain on the hand during prolonged use. This design element is essential for home cooks and professional chefs alike, allowing for efficiency in the kitchen.

In terms of technology, the Kuhn Rikon 3100 utilizes a unique, patented mechanism that simplifies cooking processes. This includes a built-in safety feature that prevents the lid from coming off unexpectedly, making it safer to handle. The product also incorporates a high-performance blade that cuts through various food types with ease, providing consistent results every time. This blade technology is especially useful for preparing ingredients quickly, catering to the fast-paced environment of modern kitchens.

The Kuhn Rikon 3100 is not just about performance; it also excels in versatility. With its multifunctional design, it can be used for a variety of cooking tasks, including slicing, dicing, and chopping. This versatility allows users to accomplish multiple tasks with a single tool, thereby minimizing clutter and maximizing efficiency in the kitchen.

Another standout characteristic of this kitchen tool is its ease of cleaning. The Kuhn Rikon 3100 is designed to be dishwasher safe, which means users can spend less time on cleanup and more time enjoying their culinary creations. This practical aspect appeals to many, as it aligns with contemporary cooking habits that favor convenience without compromising on quality.

In summary, the Kuhn Rikon 3100 is a testament to Swiss engineering, combining durability, ergonomic design, advanced technology, versatility, and easy maintenance. Whether you’re a novice home cook or a seasoned chef, this product promises to elevate your culinary experience, making it an essential addition to any kitchen arsenal. Its exceptional features and user-centric design make it a standout choice for anyone looking to enhance their cooking experience with a reliable and efficient tool.