Kuhn Rikon 3070, 3095, 3036, 3025 Mixer Setup, Installation Tips, Electric Motor Recommendations

Page 15

3000STOPR005810R082503

MIXER SETUP

IMPORTANT! READ BEFORE OPERATING MIXER.

IT IS THE RESPONSIBILITY OF THE OWNER TO MAKE SURE THE MIXER IS SET

UP PROPERLY. THE FOLLOWING RECOMMENDATIONS SHOULD BE HELPFUL

INSTALLATION TIPS

1.Be sure there is adequate clearance around the mixer for maintenance, repair and loading the mixer.

2.If the electronic weighing system is used, be sure that the weigh bars are kept clean and dry also items such as loading conveyors are not attached to or leaning on the mixer. Refer to scale manual for more specific information.

3.Mixer should be mounted on a structure of adequate strength to support a fully loaded mixer. Machine must be level and stable at the desired height. Weigh bar mounts should be fastened to this structure.

4.Manual door opener for the 3015 & 3020 can be mounted at either the front or the rear of the mixer. The following instructions will help To modify the door opener for operation from the opposite end:

a.Remove latch and mounting bolt and install to opposite end of mixer in corresponding hole.

b.Remove door wheel assembly.

c.With door in fully closed position, cut door wheel shaft to proper length, drill mount hole, slide into position and replace bolt.

5.The , 3025, 3030, 3036, 3042, 3050, 3060, & 3070 manual door opener is in a fixed position on the drive end of the mixer.

6.An optional remote electric door actuator is also available for all models. The remote door actuator is standardon the 3095.

ELECTRIC MOTOR RECOMMENDATIONS

Following is a listing of suggested motor and frame sizes. Ratings are based on “normal dairy feed rations”. Heavier rations such as feedmill use, heavy/sticky beef rations, or industrial use, contact factory. A smaller motor may be adequate for easy-mixing materials, and a larger motor may be required for difficult materials*. Wiring and overload protection should be sized according to the motor size installed. The motor mount will fit the recommended motor size. Other motor sizes may require additional holes to be drilled in mount or a different mount. Dual motor mount, frame and shield are standard on 3025, 3030, 3036 & 3042 models. All models are designed to be used with a motor operating at 1725-1750 RPM.

MODEL

3015

*HORSEPOWER

7.5

- 10

MOTOR FRAME SIZE

213T

215T

STANDARD MOTOR BUSHING

1-3/8”

OPTIONAL MOTOR BUSHING

1-1/8”

MODEL

3042

*HORSEPOWER

15

- 25

MOTOR FRAME SIZE

284T

286T

STANDARD MOTOR BUSHING

1-7/8”

OPTIONAL MOTOR BUSHING

2-1/8”

3020 3025

1010

215T 254T 254T 256T

1-3/8” 1-5/8”

1-5/8” 1-3/8”

3050

3060

50

60

326T

364T

2-1/8”

2-3/8”

2-1/8”

2-3/8”

3030

10 - 15

254T 256T

1-5/8”

1-3/8”

3070

75

365T

2-3/8”

2-3/8”

3036

15 - 20

256T 284T

1-5/8”

1-7/8”

3095

100

N/A

2-7/8”

KUHN KNIGHT INC.

15

1501 West 7th Ave. Brodhead, WI 53520-0167

 

701 Cherry Ave. Greeley, Co. 80632

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Reel Auggie Commercial SDL Mixer Table of Contents Introduction Using this ManualRead the Operators Manual SafetyUnderstand Safety Words and Symbols Follow Safety InstructionsOperating Safety Precautions Unit Part no Safety DecalsFigure a Safety InstructionsShields are in Place Figure DBeware While Loading with a Bucket Loader Figure GSafety Decal Placement Illustrations Model Model Safety Decal Placement IllustrationsSafety Decal Placement Illustrations Models 3025 Models 3036 Safety Decal Placement Illustrations Models 3050, 3060, 3070 Mixer Setup Installation TipsElectric Motor Recommendations Driveline Overload Shearbolt Safety ShieldingAuger Knives Reel Cross TubesIMPORTANT! Read Before Operating Mixer Mixer RUN-INOperation Mixing Time3000STOPR005810R082503 Mixer Operation Materials Requiring Processing Materials not Requiring ProcessingLoading and Mixing LimitationsElectronic Scale Fill LevelUnloading Options Electric Door ControlInspect and Adjust Inspection & AdjustmentsElectronic Scale optional Inspection & AdjustmentsHAY Maxx System adjustments Location LubricationLubrication Location Illustrations Model Lubrication Lubrication Location Illustrations Models 3025 Lubrication Location Illustrations Models 3036 Lubrication Location Illustrations Models 3050, 3060, 3070 Running Mixer Trouble ShootingProblem Excessive Chain Noise Problem Motor RUNS, but Reel and Augers do not TurnProblem Seal Leaking on Upper Auger Problem Seal Leaking on Input ShaftProblem Scale Hangs UP, Load Cell only Problem OIL Leaking around the Edges of the OIL BathModel Specifications

3030, 3050, 3042, 3020, 3070 specifications

Kuhn Rikon is a renowned Swiss brand that specializes in high-quality kitchen tools and gadgets, famous for their innovative designs and user-friendly functionality. Among their popular products are the Kuhn Rikon 3095, 3036, 3025, 3015, and 3060 models, each offering a unique set of features suited for various culinary tasks.

The Kuhn Rikon 3095 is particularly admired for its versatility. This model features a robust stainless steel construction that ensures durability and resistance to rust. The ergonomic handle is designed for comfort, allowing for an efficient grip during use. One of its standout features is the innovative locking mechanism that securely holds the item in place, providing added safety while working in the kitchen.

Moving on to the Kuhn Rikon 3036, this model introduces the idea of multi-functionality with its three-in-one design, which includes a knife sharpener, slice opener, and a bottle opener, making it a must-have tool in any kitchen. The blade is made from high-quality stainless steel, ensuring long-lasting sharpness and easy maintenance. Additionally, the 3036 is lightweight and easy to store, which makes it perfect for those with limited kitchen space.

The Kuhn Rikon 3025 offers precision cutting with its specially designed blade that guarantees minimal effort for maximum results. This model is equipped with a safety guard that protects the user’s fingers, making it ideal for both novice cooks and seasoned chefs. The design incorporates a non-slip grip, adding stability while performing intricate tasks such as slicing or dicing.

For those who prioritize ease of use, the Kuhn Rikon 3015 is an excellent choice. Its easy-to-clean design is dishwasher safe, making it convenient for busy individuals. The blade is engineered to provide a smooth cutting experience, capitalizing on the brand's focus on user-friendliness. It also features an integrated safety locking system to prevent accidental use, enhancing its user-friendly aspects.

Lastly, the Kuhn Rikon 3060 stands out with its vibrant and playful design, making it an attractive addition to any kitchen. This model is crafted with high-grade materials that not only ensure longevity but also contribute to its striking appearance. With a focus on enhancing culinary creativity, the 3060 promotes effortless food preparation.

In conclusion, Kuhn Rikon’s models 3095, 3036, 3025, 3015, and 3060 each embody the brand's commitment to innovation, usability, and quality. Their unique features and technologies cater to a wide range of culinary tasks, making them essential tools for any cooking enthusiast.
Top Page Image Contents