Kuhn Rikon 3025, 3095, 3036, 3015, 3060, 3070, 3020, 3042 Inspection & Adjustments, Inspect and Adjust

Page 22

3000STOPR005810R082503

INSPECTION & ADJUSTMENTS

ALWAYS STOP MIXER AND LOCK OUT POWER BEFORE SERVICING, REPAIRING, OR CLEANING. IF WORK MUST BE PERFORMED INSIDE THE MIXER, STOP MIXER AND LOCK OUT POWER AND PUT A PROTECTIVE COVER OVER THE AUGER KNIVES TO AVOID INJURY. THE HOPPER FLOOR MAY BE SLIPPERY, AND THE REEL AND AUGERS WILL SPIN WHEN STEPPED ON. USE CAUTION WHEN STEPPING OR STANDING INSIDE THE UNIT. USE SAFE SHOP PROCEDURES AND EXERCISE CAUTION WHEN WORKING ON THIS MIXER!

INSPECT AND ADJUST:

Roller Chain Tighteners so they will apply sufficient spring tension to keep roller chains running smoothly (As a general rule the thickness of a nickel should fit between the spring coils). The chain will form grooves in the tightener blocks. These grooves help to keep the chains in proper alignment, and the blocks need not be turned unless the roller portion of the chain has worn into the block.

Roller Chains for wear, proper alignment and tension. Adjust or replace if necessary. Roller chain connector links which pass over polyethylene tightener blocks must have the legs of the cotter pins trailing to the direction of rotation.

Safety Decals for readability. If any safety decals are removed, obstructed, or otherwise not understandable, they should be replaced immediately. Keep all decals clean - see Safety Decal section for more information.

Safety Shielding to be sure all shielding is in place and functioning properly. Replace all damaged or missing shielding immediately - see parts pages for more information.

Bolts and Set Screws after a few hours of use and each month thereafter. Tighten if necessary.

Reel Cross Tubes so that they slide in freely when compressed against the spring (spring pockets may need occasional cleaning). This sliding action helps prevent jamming and overloading of the driveline.

Reel Wiper Tubes have plastic wiper strips which help material clean out of the reel hopper. If the strips become bent back, they can be unbolted and turned around to improve clean out.

Upper Auger Knives can be turned over for use of a new cutting edge and should be periodically sharpened, or replaced if they are no longer sufficiently breaking up material.

Lower auger knives can be rotated several times before sharpening or replacement is required.

Motor fan guard must be kept clean to allow sufficient air flow for proper motor cooling.

Drive belts must be checked for wear and hardness. Old belts will be brittle or hard and must be replaced. Pulley misalignment often causes belt wear and this alignment should be checked when replacing any worn belt. Inspect pulleys for wear or damage both on the grooves and on the shaft diameter, clean and dry thoroughly before reas- sembly. Tighten belts to a tension that will allow the belt to deflect 1/2” when a 10lb. force is applied in the middle of the belt span. Belts should be kept clean, dry and oil free.

IMPORTANT: WHEN WELDING ON THIS UNIT: Do Not allow the current to flow through the bearings, roller chains, or scale weigh bars. Ground directly to the item being welded. ALWAYS disconnect weigh bar cords from scale indicator before welding.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Reel Auggie Commercial SDL Mixer Table of Contents Using this Manual IntroductionFollow Safety Instructions SafetyUnderstand Safety Words and Symbols Read the Operators ManualOperating Safety Precautions Safety Decals Unit Part noSafety Instructions Figure aFigure D Shields are in PlaceFigure G Beware While Loading with a Bucket LoaderSafety Decal Placement Illustrations Model Safety Decal Placement Illustrations ModelSafety Decal Placement Illustrations Models 3025 Models 3036 Safety Decal Placement Illustrations Models 3050, 3060, 3070 Installation Tips Mixer SetupElectric Motor Recommendations Reel Cross Tubes Safety ShieldingAuger Knives Driveline Overload ShearboltMixer RUN-IN IMPORTANT! Read Before Operating MixerMixing Time Operation3000STOPR005810R082503 Mixer Operation Materials not Requiring Processing Materials Requiring ProcessingLimitations Loading and MixingOptions Electric Door Control Fill LevelUnloading Electronic ScaleInspection & Adjustments Inspect and AdjustInspection & Adjustments Electronic Scale optionalHAY Maxx System adjustments Lubrication LocationLubrication Location Illustrations Model Lubrication Lubrication Location Illustrations Models 3025 Lubrication Location Illustrations Models 3036 Lubrication Location Illustrations Models 3050, 3060, 3070 Trouble Shooting Running MixerProblem Seal Leaking on Input Shaft Problem Motor RUNS, but Reel and Augers do not TurnProblem Seal Leaking on Upper Auger Problem Excessive Chain NoiseProblem OIL Leaking around the Edges of the OIL Bath Problem Scale Hangs UP, Load Cell onlySpecifications Model

3030, 3050, 3042, 3020, 3070 specifications

Kuhn Rikon is a renowned Swiss brand that specializes in high-quality kitchen tools and gadgets, famous for their innovative designs and user-friendly functionality. Among their popular products are the Kuhn Rikon 3095, 3036, 3025, 3015, and 3060 models, each offering a unique set of features suited for various culinary tasks.

The Kuhn Rikon 3095 is particularly admired for its versatility. This model features a robust stainless steel construction that ensures durability and resistance to rust. The ergonomic handle is designed for comfort, allowing for an efficient grip during use. One of its standout features is the innovative locking mechanism that securely holds the item in place, providing added safety while working in the kitchen.

Moving on to the Kuhn Rikon 3036, this model introduces the idea of multi-functionality with its three-in-one design, which includes a knife sharpener, slice opener, and a bottle opener, making it a must-have tool in any kitchen. The blade is made from high-quality stainless steel, ensuring long-lasting sharpness and easy maintenance. Additionally, the 3036 is lightweight and easy to store, which makes it perfect for those with limited kitchen space.

The Kuhn Rikon 3025 offers precision cutting with its specially designed blade that guarantees minimal effort for maximum results. This model is equipped with a safety guard that protects the user’s fingers, making it ideal for both novice cooks and seasoned chefs. The design incorporates a non-slip grip, adding stability while performing intricate tasks such as slicing or dicing.

For those who prioritize ease of use, the Kuhn Rikon 3015 is an excellent choice. Its easy-to-clean design is dishwasher safe, making it convenient for busy individuals. The blade is engineered to provide a smooth cutting experience, capitalizing on the brand's focus on user-friendliness. It also features an integrated safety locking system to prevent accidental use, enhancing its user-friendly aspects.

Lastly, the Kuhn Rikon 3060 stands out with its vibrant and playful design, making it an attractive addition to any kitchen. This model is crafted with high-grade materials that not only ensure longevity but also contribute to its striking appearance. With a focus on enhancing culinary creativity, the 3060 promotes effortless food preparation.

In conclusion, Kuhn Rikon’s models 3095, 3036, 3025, 3015, and 3060 each embody the brand's commitment to innovation, usability, and quality. Their unique features and technologies cater to a wide range of culinary tasks, making them essential tools for any cooking enthusiast.
Top Page Image Contents