Kuhn Rikon 3020 Safety Shielding, Auger Knives, Reel Cross Tubes, Driveline Overload Shearbolt

Page 16

3000STOPR005810R082503

MIXER SETUP

IMPORTANT! READ BEFORE OPERATING MIXER.

IT IS THE RESPONSIBILITY OF THE OWNER TO MAKE SURE THE MIXER IS SET

UP PROPERLY. THE FOLLOWING RECOMMENDATIONS SHOULD BE HELPFUL

SAFETY SHIELDING

Be sure all shielding is in place and functioning properly. Replace all damaged or missing shielding immediately see parts pages for replacement shielding part numbers.

BE AWARE that your installation may require additional safety shielding and/or warnings. Because each installa- tion is different, Kuhn Knight Inc. cannot design standard shielding for all conceivable situations without limiting the use of the mixer. The top of the mixer and the door opening are the two areas that should be given particular attention in regard to safety. The top of the mixer has a grid type safety shield to help prevent a person from falling into the mixer. However, because there are many different feeds and ways of loading them, the top openings must be large enough to avoid obstructing the loading operation. Likewise, the door opening area must be unobstructed to allow the discharge of feed. Kuhn Knight Inc. warns operators with decals on the mixer and specific instructions in this manual to stay clear of these areas during operation. If safety decals are blocked from view due to the installation, then additional decals should be ordered and placed so they are readable. If your particular installation is such that a person may inadvertently put an arm or leg in these areas during operation, then additional safety shielding must be installed to prevent such an occurrence. Additional shielding of the motor and drive belt area may also be necessary depending on exact installation.

AUGER KNIVES

The upper and lower auger knives are installed to help handle long materials such as long stem hay. If you do not intend to handle this type of material, the knives can be removed.

REEL CROSS TUBES

The Cross Tubes have two settings which can be utilized depending on the material being mixed. The Tubes are factory set in the outer position. In general, the inner setting is used for a high hay ration. To change to the inner position, compress and secure the tube into the spring, and relocate the capture bolt to the inner holes. The wiper tubes should

not be moved. Repeat for all Tubes.

DRIVELINE OVERLOAD SHEARBOLT

MODELS: 3036, 3042, 3050, 3060, 3070, 3095 ONLY

The driveline has a shearbolt assembly for overload protection. This shear bolt type overload protection needs very little maintenance. If the motor free spins during operation, the shear bolt has broken. Replace the sheared bolt with a new one of the same diameter, length and grade. Any bolt of different specifications than listed below will prevent the shearbolt assembly from operating properly and can cause damage to the mixer.

MODEL SHEAR BOLT SIZE

3036 1/4” X 2” GRADE 5

3042 1/4” X 2” GRADE 5

3050 1/4” X 2” GRADE 5

3060 1/4” X 2” GRADE 5

3070 5/16” X 2” GRADE 5

3095 5/16” X 2” GRADE 5

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Reel Auggie Commercial SDL Mixer Table of Contents Using this Manual IntroductionSafety Understand Safety Words and SymbolsFollow Safety Instructions Read the Operators ManualOperating Safety Precautions Safety Decals Unit Part noSafety Instructions Figure aFigure D Shields are in PlaceFigure G Beware While Loading with a Bucket LoaderSafety Decal Placement Illustrations Model Safety Decal Placement Illustrations ModelSafety Decal Placement Illustrations Models 3025 Models 3036 Safety Decal Placement Illustrations Models 3050, 3060, 3070 Installation Tips Mixer SetupElectric Motor Recommendations Safety Shielding Auger KnivesReel Cross Tubes Driveline Overload ShearboltMixer RUN-IN IMPORTANT! Read Before Operating MixerMixing Time Operation3000STOPR005810R082503 Mixer Operation Materials not Requiring Processing Materials Requiring ProcessingLimitations Loading and MixingFill Level UnloadingOptions Electric Door Control Electronic ScaleInspection & Adjustments Inspect and AdjustInspection & Adjustments Electronic Scale optionalHAY Maxx System adjustments Lubrication LocationLubrication Location Illustrations Model Lubrication Lubrication Location Illustrations Models 3025 Lubrication Location Illustrations Models 3036 Lubrication Location Illustrations Models 3050, 3060, 3070 Trouble Shooting Running MixerProblem Motor RUNS, but Reel and Augers do not Turn Problem Seal Leaking on Upper AugerProblem Seal Leaking on Input Shaft Problem Excessive Chain NoiseProblem OIL Leaking around the Edges of the OIL Bath Problem Scale Hangs UP, Load Cell onlySpecifications Model

3030, 3050, 3042, 3020, 3070 specifications

Kuhn Rikon is a renowned Swiss brand that specializes in high-quality kitchen tools and gadgets, famous for their innovative designs and user-friendly functionality. Among their popular products are the Kuhn Rikon 3095, 3036, 3025, 3015, and 3060 models, each offering a unique set of features suited for various culinary tasks.

The Kuhn Rikon 3095 is particularly admired for its versatility. This model features a robust stainless steel construction that ensures durability and resistance to rust. The ergonomic handle is designed for comfort, allowing for an efficient grip during use. One of its standout features is the innovative locking mechanism that securely holds the item in place, providing added safety while working in the kitchen.

Moving on to the Kuhn Rikon 3036, this model introduces the idea of multi-functionality with its three-in-one design, which includes a knife sharpener, slice opener, and a bottle opener, making it a must-have tool in any kitchen. The blade is made from high-quality stainless steel, ensuring long-lasting sharpness and easy maintenance. Additionally, the 3036 is lightweight and easy to store, which makes it perfect for those with limited kitchen space.

The Kuhn Rikon 3025 offers precision cutting with its specially designed blade that guarantees minimal effort for maximum results. This model is equipped with a safety guard that protects the user’s fingers, making it ideal for both novice cooks and seasoned chefs. The design incorporates a non-slip grip, adding stability while performing intricate tasks such as slicing or dicing.

For those who prioritize ease of use, the Kuhn Rikon 3015 is an excellent choice. Its easy-to-clean design is dishwasher safe, making it convenient for busy individuals. The blade is engineered to provide a smooth cutting experience, capitalizing on the brand's focus on user-friendliness. It also features an integrated safety locking system to prevent accidental use, enhancing its user-friendly aspects.

Lastly, the Kuhn Rikon 3060 stands out with its vibrant and playful design, making it an attractive addition to any kitchen. This model is crafted with high-grade materials that not only ensure longevity but also contribute to its striking appearance. With a focus on enhancing culinary creativity, the 3060 promotes effortless food preparation.

In conclusion, Kuhn Rikon’s models 3095, 3036, 3025, 3015, and 3060 each embody the brand's commitment to innovation, usability, and quality. Their unique features and technologies cater to a wide range of culinary tasks, making them essential tools for any cooking enthusiast.
Top Page Image Contents