Operation, Venting, Guide to Storage

•Use special care when moving heavily loaded units.

•Do not store combustible material on or around the unit.

•Do not operate this unit empty.

•When using the unit at a distance where an extension cord becomes necessary, a 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating. Use only a UL listed extension cord suitable for outdoor use. Make certain wire size is large enough for A/C amperage rating of unit.

Operation

Locate oven in an area free of combustible material and close to an appropriate power source. (Check name-plate for voltage.)

**Operator should read the enclosed “2110 Temperature Controller User’s Manual” before placing oven in operation. Note” The controller has been pre-configured prior to shipping. However fine tuning may be done in field. **

Wire oven to a fused disconnect of proper voltage and amperage. Load oven with flux and switch on power. Adjust temperature control set point to desired temperature. Note: Alarm option has been wired to act as an over-temperature control. See user manual configuration menus.

***CAUTION: DO NOT USE ON D/C POWER SUPPLY!***

Venting

The KHTF-600 is designed to vent around the perimeter of the lid while still maintaining temperature.

Guide to Storage

See the enclosed guide to storage. This guide may be used in the absence of storage information from the flux manufacturer. In critical situations, contact your flux manufacturer.

Scheduled Maintenance

The manufacturer recommends that after each use the operator clean all flux residue from elements and element brackets. Flux build-up on elements may cause hot spots and shorten element life. Note: For 480 V models, see the attached supplement.

Troubleshooting: The Keen oven model KHTF-600 requires a minimal amount of electrical knowledge to repair if necessary.

IF OVEN FAILS TO OPERATE – NO HEAT

1.Check power source.

2.Check power cord continuity. Replace cord assembly if faulty.

KHTF-600 specifications

Henkel KHTF-600 is a cutting-edge adhesive technology designed for a wide range of applications in the manufacturing and assembly industries. This product is particularly renowned for its superior bonding capabilities, which make it an essential choice for companies seeking reliability and performance in their adhesive solutions.

One of the main features of Henkel KHTF-600 is its exceptional adhesion to a variety of substrates, including metal, plastic, and composites. This versatility allows manufacturers to utilize a single adhesive across multiple materials, reducing the need for inventory management and streamlining production processes. The strong bond strength achieved with KHTF-600 ensures that products maintain their integrity even under demanding conditions, making it ideal for automotive, aerospace, and electronics applications.

KHTF-600 incorporates innovative adhesive technologies that enhance its performance. One such technology is the incorporation of advanced polymer formulations that increase flexibility while maintaining stiffness. This results in a bond that can withstand thermal cycling and mechanical stress, which is particularly beneficial in industries where components are subject to extreme conditions. The adhesive boasts a remarkable resistance to environmental factors such as humidity, UV light, and chemicals, ensuring durability and longevity.

Another notable characteristic of KHTF-600 is its fast curing time, which significantly enhances productivity on the assembly line. The rapid setting nature of the adhesive allows for shorter assembly times and quicker throughput, making it an attractive option for high-volume production environments. Additionally, the product is designed for easy application, whether by hand or automated dispensing systems, ensuring consistent coverage and minimizing waste.

Safety and environmental considerations are also paramount in the formulation of KHTF-600. The adhesive is designed to be low-VOC (volatile organic compound), adhering to stringent environmental regulations while still delivering high performance. This makes it a suitable choice for companies committed to sustainability and responsible manufacturing practices.

In summary, Henkel KHTF-600 stands out in the adhesive market due to its exceptional bonding capabilities, quick curing time, and compatibility with various substrates. Its advanced technologies and characteristics make it a preferred choice among manufacturers seeking reliable and efficient adhesive solutions to meet the challenges of modern production environments.