Lexmark M5163DN Ordering a toner cartridge, Ordering an imaging unit, Ordering staple cartridges

Maintaining the printer 146

Ordering a toner cartridge

Notes:

•The estimated cartridge yield is based on approximately 5% coverage per page.

•Extremely low print coverage for extended periods of time may negatively affect actual yield.

Part name

Toner Cartridge

Part number

24B6015

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name

Imaging unit

Part number

24B6025

Ordering staple cartridges

Part name

Staple cartridges

Part number

25A0013

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

•Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser.

Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

•Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser.

Notes:

•Using certain types of paper may require more frequent replacement of the maintenance kit.

•The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary.

•For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with the part.