Understanding the printer menus

93

 

 

 

 

 

Use

To

 

Recycled

Specify a paper type when Recycled is selected in other menus.

 

Paper

Notes:

 

Card Stock

 

Paper is the factory default setting.

 

Transparency

 

The custom media type must be supported by the selected tray or

 

Rough/Cotton

 

Labels

 

multipurpose feeder in order to print from that source.

 

 

 

 

Vinyl Labels

 

 

 

Envelope

 

 

 

 

 

Universal Setup menu

 

 

 

 

 

 

 

Use

 

To

 

 

 

 

 

Units of Measure

 

Identify the units of measure.

 

Inches

 

Notes:

 

Millimeters

 

 

 

Inches is the US factory default setting.

 

 

 

 

 

 

Millimeters is the international factory default setting.

 

 

 

 

 

Portrait Width

 

Set the portrait width.

 

3–8.5 inches

 

Notes:

 

76–216 mm

 

 

 

If the width exceeds the maximum, then the printer uses the

 

 

 

 

 

 

maximum width allowed.

 

 

 

8.5 inches is the US factory default setting. You can increase the

 

 

 

width in 0.01inch increments.

 

 

 

216 mm is the international factory default setting. You can increase

 

 

 

the width in 1mm increments.

 

Portrait Height

 

Set the portrait height.

 

3–14.17 inches

 

Notes:

 

76–360 mm

 

 

 

If the height exceeds the maximum, then the printer uses the

 

 

 

 

 

 

maximum height allowed.

 

 

 

14 inches is the US factory default setting. You can increase the

 

 

 

height in 0.01inch increments.

 

 

 

356 mm is the international factory default setting. You can increase

 

 

 

the height in 1mm increments.

 

Feed Direction

 

Specify the feed direction if the paper can be loaded in either direction.

 

Short Edge

 

Notes:

 

 

 

Long Edge

Short Edge is the factory default setting.

Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.

Page 93
Image 93
Lexmark M5163DN manual Universal Setup menu