Chapter 4
Hardware Monitor Setup
This section describes how to set the CPU FSB frequency, monitor the current hardware status including CPU/system temperatures, CPU/System Fan speeds, Vcore etc. Monitor function, such as “Chassis Intrusion” and “CPU Temperature”, is available only if there is hardware monitoring mecha- nism onboard.
AMIBIOS SETUP - Hardware Monitor Setup
(C)1999 American Megatrends, Inc. All Rights Reserved
CPU Ratio Selection | 8.0x |
CPU FSB Clock (Mhz) | 100 |
Spread Spectrum | ±0.38% |
Chassis Intrusion | Disabled |
CPU Temperature | 29°C/84°F |
System Temperature | 39°C/102°F |
CPU Fan Speed | 6124 RPM |
System Fan Speed | 0 RPM |
Vcore | 1.71V |
Vio | 3.26V |
+ 5.0V | 4.92V |
+12.0V | 11.40V |
– 5.0V | – 4.99V |
Battery | 3.22V |
+5V SB | 4.87V |
ESC : Quit | ↑↓←→ | : Select Item | |
F1 : Help | |||
F5 | : Old Values | (Shift)F2 : Color | |
F6 : Load BIOS Defaults |
| ||
F7 | : Load Setup Defaults |
| |
CPU Ratio Selection
The item is used to adjust the CPU clock multiplier (ratio). The item enables you to overclock the processor.
CPU FSB Clock (Mhz)
This item is used to set clock frequencies (in MHz) for CPU FSB (Front Side Bus). The field provides you an overclocking method. Settings include 100 (MHz) and above .
SpreadSpectrum
This item is used to configure the clock generator’s Spread Spectrum feature. Always disable the feature when overclocking the processor.
