Premio Computer Aries/Centella Cdrom, The system will boot from the CD-ROM, Scsi, Network, BBS-0

Shows the POST messages at boot.

Shows a still image (logo) on the full screen at boot.

Chapter 4

CDROM	The system will boot from the CD-ROM.
SCSI	The system will boot from the SCSI.
NETWORK	The system will boot from the Network drive.
BBS-0	The system will boot from the first BBS (BIOS Boot
BBS-1	Specification) compliant device.
	The system will boot from the second BBS (BIOS
BBS-2	Boot Specification) compliant device.
	The system will boot from the third BBS (BIOS
BBS-3	Boot Specification) compliant device.
	The system will boot from the fourth BBS (BIOS
Disabled	Boot Specification) compliant device.
	Disable this sequence.

Note: Available settings for “1st/2nd/3rd Boot Device” vary depend- ing on the bootable devices you have installed. For example, if you did not install a floppy drive, the setting “Floppy” does not show up.

Try Other Boot Devices

Setting the option to Yes allows the system to try to boot from other devices if the system fails to boot from the 1st/2nd/3rd boot device.

Full Screen LOGO Show

This item enables you to show the company logo on the bootup screen. Settings are:

Disabled

Enabled

S.M.A.R.T. for Hard Disks

This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting Technology) capability for the hard disks. S.M.A.R.T is a utility that monitors your disk status to predict hard disk failure. This gives you an opportunity to move data to a safe place before the hard disk becomes offline. Settings: Enabled and Disabled.

BootUpNum-Lock

This item is to set the Num Lock status when the system is powered on. Setting to On will turn on the Num Lock key when the system is powered on.

4-10