Premio Computer Aries/Centella manual LEDStatus Description

Chapter 2

Power Switch

Connect to a 2-pin push button switch.

Reset Switch

Reset switch is used to reboot the system rather than turning the power ON/ OFF. Avoid rebooting while the HDD is working. You can connect the Reset switch from the system case to this pin.

Power LED (F_P1)

The Power LED is lit while the system power is on. There are three types of LEDs you can connect from the system case to the pin:

2-pin single color power LED: Connected to pin 5 & 6. The power LED is not able to change its color. You can only choose Blinking in the BIOS utility for the power LED to indicate the suspend/sleep mode.

LEDStatus	Description
Steady Green	The system is in the full-on mode.
Blinking	The system enters the suspend/sleep mode.

2-pin/3-pin dual color power LED: 2-pin LED is connected to pin 5 &

6.3-pin LED is connected to pin 4, 5 & 6. The dual color power LED is able to change its color to indicate different system states. Therefore, you can select either Blinking or Dual (color) for the power LED to show the suspend/sleep mode.

zWhen you select Blinking in the BIOS utility:

LEDStatus	Description
Steady Green	The system is in the full-on mode.
Blinking	The system enters the suspend/sleep mode.

2-16