Lexmark M5163DN manual Using the printer control panel, Use, Display View the printer status

Learning about the printer 11

In a configuration with two or more optional finishers:

•The staple finisher must always be on top.

•The high‑capacity output expander must always be at the bottom.

•The output expander is the only finisher that can be placed on top of the high‑capacity output expander.

•The output expander and mailbox may be installed in any order.

When using optional trays:

•Always use a caster base when the printer is configured with a 2100‑sheet tray.

•The 2100‑sheet tray must always be at the bottom of a configuration.

•A maximum of four optional trays may be configured with the printer.

•The optional 250‑ and 550‑sheet trays may be installed in any order.

Using the printer control panel

1 2 3 4 5

6

10		9	8	7
	Use the	To
1 Display		• View the printer status.

•Set up and operate the printer.

2	Select button	Submit changes made in the printer settings.
3	Arrow buttons	Scroll up and down or left and right.
4	Keypad	Enter numbers, letters, or symbols.
5	Sleep button	Enable Sleep mode or Hibernate mode.
		Do the following to wake the printer from Sleep mode:
		• Press any hard button.
		• Pull out Tray 1 or load paper in the multipurpose feeder.
		• Open a door or cover.
		• Send a print job from the computer.
		• Perform a power‑on reset with the main power switch.
		• Attach a device to the USB port on the printer.

6Stop or Cancel button Stop all printer activity.

7 Back button Return to the previous screen.