Lexmark M5163DN manual Insufficient memory, some held jobs will not be restored, Load staples

Troubleshooting 186

Insufficient memory, some held jobs will not be restored [37]

Do either of the following:

•From the printer control panel, press to clear the message.

•Delete other held jobs to free up additional printer memory.

Insufficient memory to collate job [37]

Try one or more of the following:

•From the printer control panel, press to print the portion of the job already stored and begin collating the rest of the print job.

•Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Try one or more of the following:

•From the printer control panel, press to disable Resource Save, clear the message, and continue printing.

•Install additional printer memory.

Load staples

Try one or more of the following:

•Replace or insert the specified staple cartridge in the finisher.

For more information, see the “Replacing supplies” section of the User’s Guide.

•From the printer control panel, press to clear the message and continue printing.

•Cancel the print job.

Load [paper source] with [custom string] [orientation]

Try one or more of the following:

•Load the indicated tray or feeder with the correct size and type of paper.

•From the printer control panel, press to clear the message and continue printing.

Note: If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray that has the correct size and type of paper, then it prints from the default paper source.

•Cancel the current job.