Maintaining the printer

144

3Insert the emptied hole punch box back into the finisher until it clicks into place.

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is required.

Checking the status of parts and supplies on the printer control panel

From the printer control panel, navigate to:

> Status/Supplies > View Supplies >

Checking the status of parts and supplies from the Embedded Web Server

Note: Make sure the computer and printer are connected to the same network.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Device Status > More Details.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their endoflife by setting the selectable alerts.

Notes:

Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.

All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the endoflife supply condition. Email selectable alert is available for all supply conditions.

The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Page 144
Image 144
Lexmark M5163DN Checking the status of parts and supplies, Status/Supplies View Supplies, Click Device Status More Details