Lexmark M5163DN manual Understanding the printer menus 116, Error Recovery, Print Recovery

Understanding the printer menus		116
	Use	To
	Error Recovery	Set the printer to restart when an error is encountered.
	Auto Reboot	Notes:
	Reboot when idle
		• “Reboot always” is the factory default setting for Auto
	Reboot always
		Reboot.
	Reboot never
		• 5 is the factory default setting for Max Auto Reboots.
	Max Auto Reboots
		• If the printer performs the same number of automatic
	1–20
		reboots that is set in the printer within a certain amount of
		time, then the printer shows the applicable error instead of
		rebooting.
	Print Recovery	Let the printer automatically continue printing from certain offline
	Auto Continue	situations when these are not resolved within the specified time
	Disabled	period.
		Note: Disabled is the factory default setting.
	5–255
	Print Recovery	Specify whether the printer reprints jammed pages.
	Jam Recovery	Notes:
	On
		• Auto is the factory default setting. The printer reprints
	Off
		jammed pages unless the memory required to hold the
	Auto
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.
	Print Recovery	Set the printer to check for jammed paper automatically.
	Jam Assist	Note: On is the factory default setting.
	On
	Off
	Print Recovery	Print a page that may not have printed otherwise.
	Page Protect	Notes:
	Off
		• Off is the factory default setting. This prints a partial page
	On
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.
	Press Sleep Button	Determine how the printer, while in idle state, reacts to a short
	Do nothing	press of the Sleep button.
	Sleep	Note: Sleep is the factory default setting.
	Hibernate
	Press and Hold Sleep Button	Determine how the printer, while in idle state, reacts to a long press
	Do nothing	of the Sleep button.
	Sleep	Note: “Do nothing” is the factory default setting.
	Hibernate