Lexmark M5163DN manual Understanding the printer menus 115

Understanding the printer menus		115
	Use	To
	Timeouts	Set the printer to follow the setting of “Hibernate Timeout” even
	Hibernate Timeout on Connection	when an active Ethernet connection exists.
	Do Not Hibernate	Notes:
	Hibernate	• “Do Not Hibernate” is the factory default setting.
		• If “Hibernate Timeout on Connection” is set to “Do Not
		Hibernate,” then the printer never automatically hibernates.
		• If “Hibernate Timeout on Connection” is set to “Hibernate,”
		then the printer follows the value of the “Hibernate
		Timeout” setting, except when it is set to Disabled.
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning the display to the Ready state.
	15–300 sec	Note: “30 sec” is the factory default setting.
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255 sec	Notes:
		• “90 sec” is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the printer checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535 sec	• “40 sec” is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation. This setting has no effect on PCL
		emulation print jobs.
	Timeouts	Set the amount of time the printer waits for user intervention
	Job Hold Timeout	before it holds jobs that require unavailable resources and
	5–255 sec	continues to print other jobs in the print queue.
		Notes:
		• “30 sec” is the factory default setting.
		• This menu appears only when a formatted, working printer
		hard disk is installed.