Henkel, Inc, One Year Limited Warranty | Henkel K-15R specification

Henkel, Inc.

P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171

www.keenovens.com

Model K-15R

Installation Instructions & Repair Parts List

One Year Limited Warranty

Henkel, Inc. warrants its products against defects in material and workmanship. Henkel, Inc. will either repair or replace without charge any properly installed product which fails under normal operating conditions within one year from date of installation, provided it is returned to our factory, transportation prepaid, and our inspection determined it to be defective under the terms of this warranty. The warranty covers only equipment manufactured by Henkel, Inc., and does not extend to transportation, installation, or replacement charges at the buyers’ facility; nor does it apply to any other equipment of another manufacturer used in conjunctions with Henkel, Inc. equipment. No other warranty, expressed or implied exists beyond that included in this statement.

Recommended Spare Parts

When it is critical to have continuous operation of this unit;

we suggest having the following spare parts on hand:

Heating Element, Power Cord, Thermostat

General Information

The K-15R is a portable oven designed for use in the shop or field. These ovens will protect electrodes from moisture during transfer from a holding oven to the job. They are light and easy to carry. The square shape gives these ovens greater stability vertically and horizontally. They are made of steel, treated, then painted with a chemical-resistant blue paint. All Keen ovens are Mercury free. The addition of an electrical receptical to the model K-15 portable rod oven allows workers to operate 120V power tools without the necessity of using a separate extension cord. Also, welders working in close proximity to each other can daisy chain, or plug one oven into another, again eliminating the need for multiple extension cords. Because the portable rod oven draws very little current, operating power tools or operating ovens in series should not overload electrical currents.

Using the model K-15R oven saves on the expense of extension cords and the labor to place, pick-up, and store the cords.