6.Remove transit bolts.
7.Insert plastic caps provided into holes vacated and press till they click into place.
8.Keep transit bolts carefully. They will be required in case you need to shift the machine again.
9.For shifting and
10.Keep packaging material carefully. It comes handy while shifting residence.
11.PLEASE DO NOT OPERATE THE MACHINE TILL TRANSIT BOLTS HAVE BEEN REMOVED.
Setting Up
The machine should be levelled properly on the floor. However, it can be installed on any suitable platform or trolley, as desired.
Install machine in a room with adequate ventilation. Avoid a room with no windows. The back of the machine should be at least 4 inches (100 mm) away from the wall.
1.Do not place the machine on slanting, uneven, unstable surface.
2.Level the machine by using the adjustable screws provided at the bottom for levelling.
3.Loosen securing nut. Adjust the screw to change level. Tighten securing nut to ensure that screw is locked into place.
4.Make sure that the machine rests on all four feet on a level surface, at all times, to avoid vibrations during operation
5.Machine should be leveled again in case it is moved to a new site.
6.Machine is provided with ventilating openings on the base. Hence it is always recommended to put the machine on the floor after removing the carpet.
7.In countries where there are areas which may be subjected to infestation by cockroaches or other insects etc, pay attention to keep the appliance & surrounding in clean condition at at all times any damage which be caused by cockroaches etc will not be covered by the appliance guratantee.
CUSTOMER COPY
MODEL : EIENA / ELENA EX SR. NO WT ELN B/WTELNEX B
DEALER’S NAME :
CUSTOMER’S NAME :
ADDRESS :
PIN CODE : |
|
TEL. NO. (Resi.) | (Off.) |
MOTOR SR. NO. :
DATE OF PURCHASE :
8 | 29 |