qUse of extension cord not recommended since it may not be properly earthed.
qUse ISI marked sockets of reputed make for preventing loose contact of power supply cable.
qEnsure that there is a firm connection between the 3 PIN PLUG and SOCKET, else it may result in sparking and subsequent failure of 3 pin plug.
qEnsure that L,N,E is as per the Fig. Shown
qWashing machine should always be connected to socket with 16
Amps | MCB or other automatic short circuit protection devices. |
CAUTION :- The producer/Manufacturer declines any responsibility
for damage caused by failure to observe this rule. You are therefore
advised to check that your household supply has an efficient earth.
qAvoid the machine coming in contact with floor cleaning chemicals.*
qDo not wash or spray water over the switch or control panel. qDo not allow children/pets to play with the machine. qDo not wash shoes or utensils in the machine. qKeep machine away from fire or heat.
qIFB will not be responsible if the user uses accessories not manufactured or recommended by IFB.
qTake care when draining hot washing solution.
qDoor always become very hot during washing at higher temperatures. Keep children away from the appliance while it is in use.
*Exposure can lead to rusting/corrosion.
SPECIAL NOTE
ONLY USE A DETERGENT RECOMMENDED FOR FRONT LOADING WASHING MACHINES. A DETERGENT WHICH FOAMS EXCESSIVELY CAN DAMAGE THE MOTOR AND DETERIORATE THE RINSE QUALITY.
INSTALL MACHINE IN A ROOM WITH ADEQUATE VENTILATION. AVOID A ROOM WITH NO WINDOWS. THE BACK OF THE MACHINE SHOULD BE AT LEAST 4 INCHES (100 mm )AWAY FROM THE WALL.
IF YOU USE A COVER OR TABLE CLOTH ON THE TOP LID, MAKE SURE THAT THE VENTILATION SLOTS AT THE BACK ARE NOT COVERED OR BLOCKED. THIS PRECAUTION WILL PROLONG THE LIFE OF ELECTRICAL AND RUBBER COMPONENTS.
10 | 27 |