IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER.
WARNING
To reduce the risk of fire, electric shock, or injury:
1Do not use outdoors.
2Do not leave steam cleaner when plugged in. Unplug the electrical cord when not in use and before servicing.
3Do not allow to be used as a toy. Close attention is necessary when used near children, pets and plants.
4Use only as described in this manual. Use only manufacturer’s recommended accessories.
5Do not use with damaged cord or plug. If steam cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.
6Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
7Do not use extension cords or outlets with inadequate current carrying capacity.
8Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
9Do not handle plug or steam cleaner with wet hands or operate without shoes.
10Do not put any object into openings. Do not use with any opening blocked.
11Store your steam cleaner indoors in a cool, dry area.
12Keep your work area well lighted.
13Never turn the appliance over or on its side when using steam. Never direct steam towards people, animals, plants, and equipment with electrical components.
14Do not immerse the steam cleaner into water or other liquids. Always unplug the power cord from the electrical socket when filling the steam cleaner.
15Never put descaling, aromatic, alcoholic or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
16
Before filling, proceed as follows: 1) unplug the power supply, 2) relieve pressure by depressing steam delivery button, 3) allow steamer to cool down for three minutes, 4) relieve any built up pressure again by depressing steam delivery button, 5) slowly unscrew safety cap (see page 6, item 5) and wait 5 seconds before removing.
17
Metal tips on nozzles will get hot during use. Do not touch hot surfaces. Allow the attachments to cool down before replacing them while the appliance is being used.
18This appliance is intended for household use only.
19Any repair work, including the replacement of the power cord must only be carried out by an Authorized Eureka Service technician because a special tool is required. Call for nearest service location
SAVE THESE INSTRUCTIONS
2