INSTRUCTIONS FOR USE
The Eureka Hot Shot™ hand held steamer is designed to thoroughly clean hard surfaces and upholstery that will withstand high heat. Do not use on soft plastics, unsealed wood, and cold glass.
WARNING: On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. Do not use on unsealed wood. This could cause the woodgrain to rise.
It is therefore recommended that a sample cleansing be carried out on an isolated area of the surface to be cleaned. Also, check use and care instructions from the manufacturer on the object you want to clean.
HOW TO ASSEMBLE AND USE
Do not plug unit into an electrical outlet until Step 7.
WARNING: After every use, press steam delivery button until all pressure has been released before removing safety cap.
1.Unscrew the safety cap. (After first use, turn the appliance over in order to completely empty the boiler.)
2.Fill the measuring cup with water to the marked water line, once. Use the funnel to pour the water into the boiler. The boiler takes only one measuring cup of water at a time. (6 oz. maximum) Do not overfill.
NOTE: Never put descaling, aromatic, alcoholic or detergent products into the appliance, as this may damage it or make it unsafe for use.
3. Screw the cap back onto the appliance.
Attachments
4.The straight nozzle, flexible hose and fabric tool all attach using the following directions.
| Flexible Hose |
|
|
Straight Nozzle | Fabric Tool |
| Articulating Nozzle | |||
Align the single mark on the attachment |
|
|
| |
to the single mark on the appliance. Push |
|
|
| |
the attachment onto the articulating nozzle |
|
|
| |
|
|
| ||
|
|
| ||
until it stops against the appliance’s body. |
|
|
| |
Turn in a clockwise direction until the |
|
|
| |
single mark on the attachment is aligned | Gasket | |||
with the double mark on the appliance. | ||||
|
|
| ||
The attachment is now locked into |
|
|
| |
position. |
|
|
| |
7