Planetary Head Removal

1.Remove the top lid (1), attachment hub (7), the drive belt (2) and the front control panel (4).

2.The plastic ring (13) can be removed with a screwdriver by pressing it between the plastic ring and the frame, and then prying it down.

3.Remove the rubber ring (10) and the stainless steel cover (12) by prying it off with a screwdriver.

4.If only the lower part of the planetary head is to be repaired, the planetary head can be separated by removing the 3 bolts (11).

5.Loosen the set screw and remove the front pulley (3) . A 3 armed pulley puller may be required.

6.Take out the 4 screws (5).

7.By loosening and removing the 4 bolts (8), the planetary can be lowered and removed.