Varimixer W60(A), W60P operation manual Varimixer Installation Instructions

Page 5

Read this page entirely BEFORE beginning installation.

VARIMIXER INSTALLATION INSTRUCTIONS

UNDER NO CIRCUMSTANCES ARE THE SPEED LEVER, BOWL LIFT LEVER, OR THE BOWL ARMS TO BE USED TO MOVE THE MIXER INTO PLACE. DAMAGE WILL RESULT TO THE UNIT. IT IS RECOMMENDED THAT THE TOP LID BE REMOVED BEFORE MOVING THE UNIT.

The mixer must be mounted with the rubber feet, which neutralize both shaking and rusting. Spacers can be inserted under the mixer’s feet if the floor is uneven. The mixer can be bolted to the floor if desired.

Before the mixer is connected to power, it should be checked that the voltage and frequency on the rating plate is correct in relation to the place of installation. A unit labeled 220V 3 Phase will operate from 208V to 240V 3 phase safely. The rating plate is located on the rear right side of the mixer. The electrical connection box is located at the top rear of the mixer.

WARNING

Electrical and grounding connections must comply with applicable portions of the National Electrical Code and/or other local electrical codes.

Wire Color Codes

White-Phase 1

Red -Phase 2

Black-Phase 3

Green-Ground

No Neutral is used

1. Lower the bowl lift lever.

2. Remove the bowl and all tools.

3. Raise the bowl lift.

4. Close bowl screen if equipped. 5. Turn timer to 10 minutes and

6. Insure cover is rotating in

push “start” .

the correct direction.

2

Image 5
Contents Models W30A, W40A, W40P, W60A and W60P Page To Secure Warranty Service Limited WarrantyExclusions Limitations of LiabilityTable of Contents Varimixer Installation Instructions Operation of the Mixer Whip Beater Hook Cream Belt Adjustments and Removal To remove V-belts or tooth belt Page Adjustment of Bowl Height Page Bowl Lift Microswitches Present Description Machine Column1A, 1B, 1C Part Number Description Bowl ArmsPage Description Planetary Head42 51 W30 a W40 a W40P W60 a W60P TransmissionPage Speed Lever Assembly Page Description W40PI W60PI Single Speed TransmissionIdentifying a #17 HUB Versus a #12 HUB Part Number Description Attachment Drive Gearbox102 Electrical Panel 1985 June Page Electrical Panel July 1998 Present Page Bowl Screen 1993 Present Page Fig. No Bowl Scraper 1985-2000 Screw TypePage Fig. No Description Order Number W30 Keyhole Bowl ScraperPage Attachments and Optional Products June Phase June Phase Present Phase Present Phase Campus Drive Shreveport LA 800