GE JBP90SF dimensions Dimensions and Installation Information in inches, Roughed-indimensions

TM

JBP90BF/KF/SF/TF–GE Profile™ 30" Free-Standing CleanDesign Electric Range

Dimensions and Installation Information (in inches)

	30
	2-1/2
	25
Acceptable electrical	2-1/2
outlet area

29-7/8

7-1/2

46-1/2

Preferred electrical

outlet area

Roughed-in dimensions

25-3/8*

47-5/8

*Dimension from wall to front of closed oven door handle is 27-3/8”.

Specification Created 12/01

KW Rating

240V	11.5
208V	8.3

†Receptacle Locations: For 30" Free-Standing Ranges locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops.

To reduce possibility of scorching of walls, it is recommended a minimum of 1-1/2" spacing be allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating element operation.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

All GE ranges are equipped with
an Anti-Tip device. The installation		Listed by
of this device is an important,
		Underwriters
required step in the installation
	R	Laboratories
of the range.