Owner’s Manual
Main Specifications
S-OPT is a REAC optical converter that converts RSS Digital Snake System REAC signals to and from optical signals for long-distance digital audio transmission. By using this REAC optical converter and optical cables (sold separately), the REAC transmission distance can be extended to a maximum of 2 kilometers.
S-OPT has the following properties:
•The S-OPT optical connectors are Neutrik OpticalCon connectors and support Mobile Fiber Cable from Neutrik. This optical interface provides for transmitting sound over long distances via optical cables while still taking advantage of the RSS Digital Snake System’s mobility.
•Because the OpticalCon connector also provides a Dual LC optical connector (standard LC-Duplex connector, IEC 61754-20), less expensive optical cables can be used for permanent installations of the RSS Digital Snake System.
•Two S-OPT units can be connected using the proprietary POWER LINK cable (ARC-15, sold separately) so that redundant power can be supplied from one unit to the other. If power to a single unit is interrupted due to some situation or is damaged, both units will still continue to operate.
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3–4), and “IMPORTANT NOTES” (p. 5). These sections provide important information concerning the proper operation of the unit. Additionally, in order to ensure that you have gained a good grasp of every feature provided by your new unit, the Owner’s Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
