Keurig B31 manual Min

CAUTION: There is extremely hot water in the K-Cup Holder during the brew process. To avoid risk of injury, do not lift the Brewer Handle or open the K-Cup Assembly Housing during the brewing process.

2 Min

11 12 13 14

Lower the Brewer Handle completely and firmly to close.

The BREW Button will flash blue. Press the BREW Button. It will then flash red while the water is heating, and turn solid red when brewing begins.

The water will reach the correct temperature in approximately

2 minutes. The BREW Button will turn solid red and your beverage will start to dispense.

If you are performing an initial cleansing brew, discard the water from the mug and begin at Step 4 to brew your first beverage.

If you have previously completed an initial cleansing brew, enjoy your beverage.

Ensure all of the water has left the Cold Water Reservoir and drained into the Brewer before lowering the Brewer Handle.

Your Brewer is now ready for the next beverage. Begin the process again, adding fresh water and a new K-Cup.

11